Skip to main content

Upcycled Tin Container Solar Light Display

 


Happy Wednesday! I hope that you are all doing well. Today we're working on an upcycled project using a tin can, solar light, and a few other materials. 


Upcycled Tin Container Solar Light Display Video tutorial





Materials 

Tin If you have a tin can around your house, this project is perfect for reusing your tin can.  I'm using a Wasabi tin can

Paint- I'm using black chalk paint

One paint brush

Butterfly stickers- Purchased at Dollar Tree (I am using pop-up stickers, and they are not waterproof. My display is being displayed on a screened-in porch. Other options are vinyl stickers or another material that may be waterproof.

Faux succulents- They have a variety at Dollar Tree, and also at Walmart. I purchased my succulents from a few different stores

Hot glue

One solar light-Purchased at Dollar Tree

Scissors

Optional- Craft rocks or marbles- This can be placed on the inside of your tin can, to help weigh it down.
Floral snips



Take some of your black chalk paint, and apply it to your tin can.  For complete coverage, you will need to apply around three coats of paint to your tin can.  Set your tin can aside, and allow it to fully dry. 
If you would like, you can use a blow dryer on the lowest setting, and dry your paint between coats. Be sure that if you're holding the can you protect your hand with either an oven mitt or towel. The tin can get very hot. 




Next, using your scissors, create a small hole in the middle of the lid. You want the hole to be just large enough for the solar light stake to fit through. Once you have done so, set your lid aside.






After, take your hot glue, and add just a little on the back side of each butterfly that you add to your tin can. Even though the butterflies have a sticky backing to them, I wanted to be sure to add some extra adhesive. 





Now you are ready to start gluing on your succulent flowers. Glue your succulent flowers around the outer section of the hole. Be sure to leave enough room for when you insert your light.

This is optional, but if you have any craft rocks or marbles, you can add them to the inside of your tin can. This helps to weigh the can down. I added in a few craft rocks after gluing my succulents. 

Note***If you are using butterfly stickers like I did, I would recommend displaying your solar light display on a porch that gets enough sunlight, but is not near any water since the butterflies are not waterproof. 
But you can use vinyl stickers or another material for your butterflies that can be in all elements. I decided to use the pop-up stickers since I am displaying my solar light on a screened-in porch.



Your solar light display is complete. I hope you have enjoyed creating this upcycled craft. Be sure to leave a comment below, and let me know if you will be creating your very own. I'll see you soon.

Pin/save/share








































Comments

  1. That's such an imaginative way to upcycle an old tin can. Beautiful!

    ReplyDelete
  2. Looks nice, I love things that light up!! Thanks so much for linking up at the #UnlimitedLinkParty 115. Pinned.

    ReplyDelete
  3. Wonderful idea Stephanie! I have been on a tin can kick myself, the possibilities are endless using them in decor. I am in loving your light idea, I need to step outside and give the patio a makeover and this would be perfect setting on one of the end tables!

    ReplyDelete
    Replies
    1. Thank you! Yes, I really enjoyed this craft. Thank you for stopping by.

      Delete
  4. Stephanie,
    What a great idea. You always come up with awesome ideas. Congratulations, You are being featured on TFT. I hope you stop by. https://www.eclecticredbarn.com/2024/04/lots-of-flowers-on-tft.html
    Hugs,
    Bev

    ReplyDelete
  5. Genuius as always. What fun to make for this time of year and evenings outside. Featuring when my link party opens!

    ReplyDelete
    Replies
    1. Carol, thank you. I'm happy to hear you enjoyed it. :) Excited to be featured at your party.

      Delete
  6. Coffee cans work great--I love this project!

    ReplyDelete
    Replies
    1. Thank you! I'm happy you enjoyed this project. :)

      Delete
  7. What a totally fun idea! It's lovely, Steph! Visiting from the Wednesdays in the Studio link party.

    ReplyDelete
    Replies
    1. Jennifer, aw, thank you! I appreciate your visit. 😊

      Delete
  8. Now you've got me thinking of waterproof ways to copy this into the yard! Featuring you at Wednesdays in the Studio!

    ReplyDelete
    Replies
    1. Jennifer, thank you! Yes, there are so many different ways to customize this design. Thank you for the feature.

      Delete

Post a Comment

I love hearing from you! Your comments and creative ideas truly brighten my day. I do my best to respond to everyone, so if you have a question or just want to say hello, please leave a note below. To keep our community a positive and inspiring space, spam or off-topic comments will be removed. Happy crafting!

Popular posts from this blog

Easy Breezy DIY: How To Make Summer Coasters

Happy Summer! I'm excited to share this simple DIY craft with you. I found some cute summery napkins at my local Dollar Tree and knew I wanted to create another summer craft, but I wasn't sure what I wanted to create. Today I will show you how to create these simple summer coasters that are perfect for the season. Video tutorial Easy Breezy DIY: How To Make Summer Coasters Materials: - Round wood circles - Napkins - Mod Podge (I'm using the dishwasher-safe one) - Acrylic paint - Paintbrush - One cork sheet (I'm using the adhesive cork sheet from Dollar Tree) Begin by taking your adhesive cork sheet and flipping it over so that the adhesive backing is facing up. Next, take a pencil and start to trace each of your round wooden circles. Then, take your scissors and cut out each of the traced circles. You can use a craft knife to make any necessary adjustments.  After that, take your circles and begin to remove the back of each of the cork circles exposing the sticky backin...

How I Refreshed an Old Garden Statue with Paint (Easy Patio DIY)

This charming toad perched on his toadstool has been a beloved part of our patio for years, enduring the passage of time while gradually succumbing to the effects of sun and weather. With each season, he has faded a little more, losing some of his vibrant colors and details. Rather than allowing him to blend into the background and become just another forgotten decoration, I decided it was time to breathe new life into him.  I shared the whole process in a quick YouTube Shorts video called “Watch Me Refresh This Old Garden Statue.” It’s a simple before‑and‑after, but such a satisfying one.  Materials I Used Garden statue (mine is a toad on a toadstool) Sandpaper Acrylic paints Small detail brushes Mod Podge (for sealing and protection) Sanding and Painting I began by gently sanding the statue to smooth out the chipped and faded paint. It only takes a few minutes, but it makes such a difference. Once the surface felt ready, I brought out my acrylic paints and started...

Summer Craft: DIY Paper Plate Watermelon Flower Hanger

Hey everyone! I'm excited to show you a fun and easy craft. Today, we will be making a summer watermelon floral hanging design using a paper plate. This DIY project is easy to create and fun to welcome the summer season. You'll make this watermelon floral hanging design to display your artificial flowers creatively. It's also a great way to use any extra paper plates you may have lying around and aren't sure what to do with. You may have extras from a birthday party or a BBQ. If you're ready, let's get started creating your floral hanging design! Video tutorial Summer Craft: DIY Paper Plate Watermelon Flower Hanger Materials: - Paintbrush - Artificial flowers - Paper plate (any size you prefer) - String or craft twine - Scissors - Hot glue Optional-Hole Puncher Start by cutting the paper plate in half. Use a darker green paint to cover the bottom area of the plate. Let it dry between each coat of paint. Continue applying paint to each area of the plate. Then, ad...

DIY Faux Blossom Branch Tree

Are you looking to add some charm to your living space on a budget? Try making your own DIY Faux Blossom Branch Tree. In this tutorial, I will guide you through the process of creating your blossom branch tree. The best part is that this project requires just a few simple materials, and you can even repurpose a section of a tree branch. Alternatively, you can use a smaller section of a tree branch or one similar to the one I am using. So, if you're ready to start, come along and create your blossom branch tree with me. DIY Faux Blossom Branch Tree video tutorial Materials  Section of branches from a tree in my yard faux florals and leaves hot glue  A planter pot Floral cutters  A foam floral block, and optional rocks After inserting your tree branch into the foam block, you can add rocks on top. This will provide additional weight to your pot and prevent the tree branch from shifting or moving around. Cutting the flowers and leaves To create a beautiful blossom tree, foll...

DIY Budget-Friendly Succulent Plant Hanger Design

 Hi everyone! I hope that you are doing well. Today I am sharing an easy DIY craft that is budget-friendly, and easy to create. A material list will be provided, along with step-by-step instructions on creating your very own. Be sure to check out the video tutorial below. Video tutorial Materials One 4x4 framed art Acrylic paint Faux succulents Hot glue and any other heavy-duty adhesive Twine Scissors  Floral cutters Paintbrush You can find most of these materials at your local Dollar Tree This project costs under five dollars If your frame comes with beads as shown in the picture above, take your scissors and remove the beads. You will actually reuse the beads later on in this craft. Take the inner section of your out and set it aside. Next, take your acrylic paint and paintbrush, and begin to apply your paint to your frame. I applied three coats of my paint to my frame. Next, use your paintbrush you apply paint over the inner section of the frame we removed earlier. I applie...

Search This Blog

All content Copyright

Copyright 2021-2025 I ask that you do not take or use my photos or words without permission. If you have any questions, please feel free and contact me. Also, for more information on this blog, check out the disclosure policy tab above. Thank you