Skip to main content

Upcycled Tin Container Solar Light Display

 


Happy Wednesday! I hope that you are all doing well. Today we're working on an upcycled project using a tin can, solar light, and a few other materials. 


Upcycled Tin Container Solar Light Display Video tutorial





Materials 

Tin If you have a tin can around your house, this project is perfect for reusing your tin can.  I'm using a Wasabi tin can

Paint- I'm using black chalk paint

One paint brush

Butterfly stickers- Purchased at Dollar Tree (I am using pop-up stickers, and they are not waterproof. My display is being displayed on a screened-in porch. Other options are vinyl stickers or another material that may be waterproof.

Faux succulents- They have a variety at Dollar Tree, and also at Walmart. I purchased my succulents from a few different stores

Hot glue

One solar light-Purchased at Dollar Tree

Scissors

Optional- Craft rocks or marbles- This can be placed on the inside of your tin can, to help weigh it down.
Floral snips



Take some of your black chalk paint, and apply it to your tin can.  For complete coverage, you will need to apply around three coats of paint to your tin can.  Set your tin can aside, and allow it to fully dry. 
If you would like, you can use a blow dryer on the lowest setting, and dry your paint between coats. Be sure that if you're holding the can you protect your hand with either an oven mitt or towel. The tin can get very hot. 




Next, using your scissors, create a small hole in the middle of the lid. You want the hole to be just large enough for the solar light stake to fit through. Once you have done so, set your lid aside.






After, take your hot glue, and add just a little on the back side of each butterfly that you add to your tin can. Even though the butterflies have a sticky backing to them, I wanted to be sure to add some extra adhesive. 





Now you are ready to start gluing on your succulent flowers. Glue your succulent flowers around the outer section of the hole. Be sure to leave enough room for when you insert your light.

This is optional, but if you have any craft rocks or marbles, you can add them to the inside of your tin can. This helps to weigh the can down. I added in a few craft rocks after gluing my succulents. 

Note***If you are using butterfly stickers like I did, I would recommend displaying your solar light display on a porch that gets enough sunlight, but is not near any water since the butterflies are not waterproof. 
But you can use vinyl stickers or another material for your butterflies that can be in all elements. I decided to use the pop-up stickers since I am displaying my solar light on a screened-in porch.



Your solar light display is complete. I hope you have enjoyed creating this upcycled craft. Be sure to leave a comment below, and let me know if you will be creating your very own. I'll see you soon.

Pin/save/share








































Labels:
Location: Colorado, USA

Comments

  1. ttjsaunders@gmail.comMay 10, 2022 at 10:17 AM

    very cute...n very clever

    ReplyDelete
  2. Sum of their StoriesMay 14, 2022 at 5:18 AM

    That's such an imaginative way to upcycle an old tin can. Beautiful!

    ReplyDelete
  3. Dee | GrammysGrid.comJune 6, 2023 at 4:00 AM

    Looks nice, I love things that light up!! Thanks so much for linking up at the #UnlimitedLinkParty 115. Pinned.

    ReplyDelete
  4. Vintage Style GalJune 21, 2023 at 12:00 PM

    Wonderful idea Stephanie! I have been on a tin can kick myself, the possibilities are endless using them in decor. I am in loving your light idea, I need to step outside and give the patio a makeover and this would be perfect setting on one of the end tables!

    ReplyDelete
    Replies
    1. StephanieJune 23, 2023 at 1:19 PM

      Thank you! Yes, I really enjoyed this craft. Thank you for stopping by.

      Delete
  5. Eclectic Red BarnApril 24, 2024 at 7:22 PM

    Stephanie,
    What a great idea. You always come up with awesome ideas. Congratulations, You are being featured on TFT. I hope you stop by. https://www.eclecticredbarn.com/2024/04/lots-of-flowers-on-tft.html
    Hugs,
    Bev

    ReplyDelete
  6. Carol, The Answer Is ChocolateApril 25, 2024 at 9:41 AM

    Genuius as always. What fun to make for this time of year and evenings outside. Featuring when my link party opens!

    ReplyDelete
    Replies
    1. StephanieApril 25, 2024 at 3:36 PM

      Carol, thank you. I'm happy to hear you enjoyed it. :) Excited to be featured at your party.

      Delete
  7. AnonymousMay 23, 2024 at 2:24 PM

    Coffee cans work great--I love this project!

    ReplyDelete
    Replies
    1. StephanieMay 23, 2024 at 3:22 PM

      Thank you! I'm happy you enjoyed this project. :)

      Delete
  8. Joanne May 27, 2024 at 12:32 PM

    That is really pretty!

    ReplyDelete
  9. Jennifer WiseFebruary 4, 2026 at 12:58 PM

    What a totally fun idea! It's lovely, Steph! Visiting from the Wednesdays in the Studio link party.

    ReplyDelete
    Replies
    1. StephanieFebruary 4, 2026 at 9:57 PM

      Jennifer, aw, thank you! I appreciate your visit. 😊

      Delete
  10. Jennifer AdamsFebruary 10, 2026 at 11:23 AM

    Now you've got me thinking of waterproof ways to copy this into the yard! Featuring you at Wednesdays in the Studio!

    ReplyDelete
    Replies
    1. StephanieFebruary 10, 2026 at 11:55 AM

      Jennifer, thank you! Yes, there are so many different ways to customize this design. Thank you for the feature.

      Delete

Post a Comment

I love hearing from you! Your comments and creative ideas truly brighten my day. I do my best to respond to everyone, so if you have a question or just want to say hello, please leave a note below. To keep our community a positive and inspiring space, spam or off-topic comments will be removed. Happy crafting!

Popular posts from this blog

DIY Budget-Friendly Succulent Plant Hanger Design

 Hi everyone! I hope that you are doing well. Today I am sharing an easy DIY craft that is budget-friendly, and easy to create. A material list will be provided, along with step-by-step instructions on creating your very own. Be sure to check out the video tutorial below. Video tutorial Materials One 4x4 framed art Acrylic paint Faux succulents Hot glue and any other heavy-duty adhesive Twine Scissors  Floral cutters Paintbrush You can find most of these materials at your local Dollar Tree This project costs under five dollars If your frame comes with beads as shown in the picture above, take your scissors and remove the beads. You will actually reuse the beads later on in this craft. Take the inner section of your out and set it aside. Next, take your acrylic paint and paintbrush, and begin to apply your paint to your frame. I applied three coats of my paint to my frame. Next, use your paintbrush you apply paint over the inner section of the frame we removed earlier. I applie...
24 comments
Read more

Simple DIY Glass Candle Holder Design

 Hi everyone!  Today we will create a simple do-it-yourself craft. This craft was under five dollars and takes very few materials. I only had to pick up two of the main materials, the glass jar, and the wall creation leaf design. If you're ready I will provide you with a material list, and step, by step instructions.  Video tutorial Materials  One glass jar-Purchased at Dollar Tree One wall creation decal sticker design-Purchased at Dollar Tree Frosted glass spray Gold wire One Wire cutter Optional- craft gems with sticky backing First, take your two glass jars, and give them a quick wash. This will help to remove any residue that may be left from the purchase sticker after removing it. Be sure to take a cloth, and completely dry your glass jars.  Once you have allowed your jars to completely dry, lay out a section of cardboard, and take your frosted glass paint, and apply it onto your glass jars. When you spray your jars, be sure to move to a well-ventilated ar...
30 comments
Read more

Easy Double-sided Glass Panel Pressed Flower Design

Learn how to make a beautiful double-sided glass panel with a pressed flower design with this easy and creative craft tutorial . It's perfect for adding a unique touch to your home decor or as a personalized gift.  In this quick DIY project, I'll show you how to create a pressed flower design using a frame decor with panels, which I purchased from my local Target for $3. Initially, I wasn't sure what to do with them, but I had a few ideas, and this is what I came up with. The project typically takes around 10 minutes to assemble. Check out the video tutorial Materials Papercraft faux flower embellishments, or you can use real dried flowers One frame decor with two plastic or glass panels Paintbrush Acrylic paint Mod Podge- I'm using the Super Gloss finish Applying paint to the frame Begin by removing the panels from your frame. Once you have removed the glass/plastic panels, set them aside. Take your paintbrush and apply paint to your frame. I painted two coats of paint...
42 comments
Read more

Spring Floral Hanging Wall Decoration

 Hi everyone! I'm so happy that you decided to stop by. Today we're creating a Spring floral hanging wall decoration. This DIY project is so simple.  Video tutorial Materials needed -One wood pallet plaque  -One bundle of Spring faux floral  -Clear glue -Twine -Small glass jars -I'm reusing my fruit spread jars. If you have any jars around this craft would be perfect to use in Floral snips Scissors Hot glue Start by taking your glass jars, and begin to wrap the top section of your jar with twine. Repeat this step on your second jar. Once you have wrapped the top section, take your scissors, and cut off any of the extra twine.  Use your hot glue, and glue the end of your twine to your glass jar.  Next, take your twine, and cut two long strands. You will tie the twine around the top section, and tie off a knot around the jar. Next, take the ends of the twine, and begin to pull them through the gaps on the wood pallet.  Once you have pulled the two ends o...
20 comments
Read more

Fourth of July Wooden Hanging Sign

 Hi everyone. I hope that you are all doing well. This week we encountered floods and tornado warnings in our area. We are all fine, but it worried a lot of us. The sun decided to finally make an appearance. Perfect timing to create another quick and easy Fourth of July craft.   I am sharing a quick Fourth of July wooden sign craft. I still have a few festive decorations lying around my craft room.  I am also reusing my wooden sign from an older project. So if you have an older wooden sign that you would love to give a quick transformation to, this craft is perfect for you! Video tutorial Materials One wooden sign- I am reusing my wooden sign from an older project  The sign size is 11 x 8 Foam scatter stars- I purchased a bag at my local Dollar Tree store Tulle or ribbon Paintbrushes Acrylic paint- Red, white and blue Adhesive- I am using both E6000 and hot glue Scissors Applying paint to a wooden sign Begin by adding your acrylic paints to your wooden board. ...
17 comments
Read more

Search This Blog

All content Copyright

Copyright 2021-2026 I ask that you do not take or use my photos or words without permission. If you have any questions, please feel free and contact me. Also, for more information on this blog, check out the disclosure policy tab above. Thank you