Skip to main content

Upcycled Tin Container Solar Light Display

 


Happy Wednesday! I hope that you are all doing well. Today we're working on an upcycled project using a tin can, solar light, and a few other materials. 


Upcycled Tin Container Solar Light Display Video tutorial





Materials 

Tin If you have a tin can around your house, this project is perfect for reusing your tin can.  I'm using a Wasabi tin can

Paint- I'm using black chalk paint

One paint brush

Butterfly stickers- Purchased at Dollar Tree (I am using pop-up stickers, and they are not waterproof. My display is being displayed on a screened-in porch. Other options are vinyl stickers or another material that may be waterproof.

Faux succulents- They have a variety at Dollar Tree, and also at Walmart. I purchased my succulents from a few different stores

Hot glue

One solar light-Purchased at Dollar Tree

Scissors

Optional- Craft rocks or marbles- This can be placed on the inside of your tin can, to help weigh it down.
Floral snips



Take some of your black chalk paint, and apply it to your tin can.  For complete coverage, you will need to apply around three coats of paint to your tin can.  Set your tin can aside, and allow it to fully dry. 
If you would like, you can use a blow dryer on the lowest setting, and dry your paint between coats. Be sure that if you're holding the can you protect your hand with either an oven mitt or towel. The tin can get very hot. 




Next, using your scissors, create a small hole in the middle of the lid. You want the hole to be just large enough for the solar light stake to fit through. Once you have done so, set your lid aside.






After, take your hot glue, and add just a little on the back side of each butterfly that you add to your tin can. Even though the butterflies have a sticky backing to them, I wanted to be sure to add some extra adhesive. 





Now you are ready to start gluing on your succulent flowers. Glue your succulent flowers around the outer section of the hole. Be sure to leave enough room for when you insert your light.

This is optional, but if you have any craft rocks or marbles, you can add them to the inside of your tin can. This helps to weigh the can down. I added in a few craft rocks after gluing my succulents. 

Note***If you are using butterfly stickers like I did, I would recommend displaying your solar light display on a porch that gets enough sunlight, but is not near any water since the butterflies are not waterproof. 
But you can use vinyl stickers or another material for your butterflies that can be in all elements. I decided to use the pop-up stickers since I am displaying my solar light on a screened-in porch.



Your solar light display is complete. I hope you have enjoyed creating this upcycled craft. Be sure to leave a comment below, and let me know if you will be creating your very own. I'll see you soon.

Pin/save/share








































Comments

  1. That's such an imaginative way to upcycle an old tin can. Beautiful!

    ReplyDelete
  2. Looks nice, I love things that light up!! Thanks so much for linking up at the #UnlimitedLinkParty 115. Pinned.

    ReplyDelete
  3. Wonderful idea Stephanie! I have been on a tin can kick myself, the possibilities are endless using them in decor. I am in loving your light idea, I need to step outside and give the patio a makeover and this would be perfect setting on one of the end tables!

    ReplyDelete
    Replies
    1. Thank you! Yes, I really enjoyed this craft. Thank you for stopping by.

      Delete
  4. Stephanie,
    What a great idea. You always come up with awesome ideas. Congratulations, You are being featured on TFT. I hope you stop by. https://www.eclecticredbarn.com/2024/04/lots-of-flowers-on-tft.html
    Hugs,
    Bev

    ReplyDelete
  5. Genuius as always. What fun to make for this time of year and evenings outside. Featuring when my link party opens!

    ReplyDelete
    Replies
    1. Carol, thank you. I'm happy to hear you enjoyed it. :) Excited to be featured at your party.

      Delete
  6. Coffee cans work great--I love this project!

    ReplyDelete
    Replies
    1. Thank you! I'm happy you enjoyed this project. :)

      Delete
  7. What a totally fun idea! It's lovely, Steph! Visiting from the Wednesdays in the Studio link party.

    ReplyDelete
    Replies
    1. Jennifer, aw, thank you! I appreciate your visit. 😊

      Delete
  8. Now you've got me thinking of waterproof ways to copy this into the yard! Featuring you at Wednesdays in the Studio!

    ReplyDelete
    Replies
    1. Jennifer, thank you! Yes, there are so many different ways to customize this design. Thank you for the feature.

      Delete

Post a Comment

Thank you so much for taking the time to leave a comment! Your feedback truly brightens my day, and I appreciate it. I always strive to respond to every comment. If you have a question, please don’t hesitate to ask! Please note that spam or comments that do not provide value will be automatically removed. Thank you!

Popular posts from this blog

Cute Spring Decor: DIY Dollar Tree Frame

  Hi everyone! Today, I'm excited to share a simple frame craft using Dollar Tree materials. We'll create an easy Spring frame design with one of their frames. I'll provide a complete materials list, and for those who prefer visual guidance, there will be a video tutorial to follow along with.  Video tutorial Materials: -4x4 plywood frame (I'm using the frame with the bead design around the front) -One mini bunny wood decoration (I found a pack at Dollar Tree a few years ago) -Acrylic paint for painting the bunny (I'm using brown acrylic paint), and light blue  paint for the frame -Spring embellishments - I'm using spring buttons and other decorations for my frame -Peel-and-stick decorative wallpaper - I found a few new designs at Dollar Tree -Hot glue -Paintbrush or spongebrush Removing the backing from the frame: Before you begin, remove the backing and the glass. Set the back of the frame aside. Preparing the peel-and-stick paper: Flip the peel-and-stick pap...

Transforming a Metal Can into Shabby Chic Keepsake Decor

Hello everyone, I am excited to share this easy DIY project with you. We will be transforming a metal can into a charming shabby chic keepsake decor using a fabric heart garland, paint, and a few other materials. You will love the end result of this project. Let's turn your trash into treasure with this simple DIY project. I will provide a detailed list of materials below. If you're ready, let's start creating our keepsake decor. Shabby Chic Keepsake Decor Video tutorial Materials One metal can Acrylic paint in Ballet Slipper by Waverly and white Four acorn wooden dowels with a 1’’ 3/8’’ hole purchased from Hobby Lobby Paintbrush Fabric heart garland from Dollar Tree Repurposed fabric from an old vest Decorative sticker pack from Dollar Tree Faux pearls Faux paper flower Applying paint to a metal can Begin by taking a metal can and applying acrylic paint to it. Use a heating tool between each coat of paint. I recommend using acrylic paint with a matte finish and applying ar...

Easy Double-sided Glass Panel Pressed Flower Design

Learn how to make a beautiful double-sided glass panel with a pressed flower design with this easy and creative craft tutorial . It's perfect for adding a unique touch to your home decor or as a personalized gift.  In this quick DIY project, I'll show you how to create a pressed flower design using a frame decor with panels, which I purchased from my local Target for $3. Initially, I wasn't sure what to do with them, but I had a few ideas, and this is what I came up with. The project typically takes around 10 minutes to assemble. Check out the video tutorial Materials Papercraft faux flower embellishments, or you can use real dried flowers One frame decor with two plastic or glass panels Paintbrush Acrylic paint Mod Podge- I'm using the Super Gloss finish Applying paint to the frame Begin by removing the panels from your frame. Once you have removed the glass/plastic panels, set them aside. Take your paintbrush and apply paint to your frame. I painted two coats of paint...

Easy Dollar Tree Easter Tabletop Decoration

Transform your Easter table into a whimsical wonderland with a delightful metal bunny plaque from Dollar Tree - it's an easy and affordable DIY project! Today we are creating an Easter tabletop decoration using one of the galvanized bunnies from Dollar Tree. I actually purchased it last year, but I hadn't gotten around to creating a craft with it until now. This craft is beginner-friendly and only uses a few materials.  Video tutorial Materials One galvanized bunny sign One rectangular wooden piece  can easily use scrap wood. I am using a wooden piece from a block set. I purchased one round wood piece at Dollar Tree; they come in different shapes. I decided to go with the oval shape. Acrylic paint- I am using a color called celery for the wood pieces and applying white to the bunny sign. Twine Faux greenery and tulips Mod Podge Paintbrush Hot glue Decorative napkin Floral cutters Begin by taking your paintbrush and applying paint over your galvanized bunny. This is not requir...

Transforming Oui Yogurt Jars: Creating a Window Hanging Flower Display

Transforming Oui Yogurt jars into a hanging flower display is a simple way to add charm to any space. In this post, you'll learn how to customize and hang these jars with flowers. Get ready to create a beautiful, eco-friendly display that brightens up your home or garden. Whether you're new to upcycling or just itching for a quick creative fix, this easy and budget-friendly project will brighten up any window in your home with elegance and charm. Video tutorial What You’ll Need: 3 Oui yogurt jars (or any small glass jars you have on hand) Transfer stickers of your choice — I used cold transfer stickers I snagged on sale at my local Michaels Artificial flowers Scissors Floral cutters Twine Spring tension rod (or clear sturdy command hooks) 1. Prep Your Jars and Add a Personal Touch Begin with clean, dry jars. These little glass containers serve as the perfect blank canvas. Select your transfer stickers—I opted for a floral theme because who doesn’t love more blooms? I trimmed th...

Search This Blog

All content Copyright

Copyright 2021-2025 I ask that you do not take or use my photos or words without permission. If you have any questions, please feel free and contact me. Also, for more information on this blog, check out the disclosure policy tab above. Thank you