Skip to main content

Fall Fox Garland: Easy and Affordable DIY Decor with Dollar Tree Items

Create a beautiful fall-themed fox garland using affordable Dollar Tree items. This easy and inexpensive DIY decor project will add a touch of seasonal charm to your home. Follow our step-by-step guide to make your own fall fox garland today.

Hello everyone! I'm excited to share an effortless garland design with you all. Our project today involves creating a garland using fox ornaments purchased from Dollar Tree. We will also incorporate wooden mini-leaf embellishments and faux floral to add a wonderful touch. You can find a complete list of materials below.

Completed fox garland displayed on twine with wooden leaves and faux floral

Video tutorial




Creating your fall fox garland

Materials 

Mod Podge
Paintbrush
Acrylic paint
Mini wood leaf embellishments
Fox ornaments 
Decorative napkin
I'm also using a mini-craft iron 
Parchment paper
Hot glue
Craft knife
Sandpaper

Adding the decorative napkin to the wooden foxes using Mod Podge

Mod podge, paintbrush, wooden fox, decorative napkin, and mini iron.


To prepare the wooden fox for decorating, start by removing the bottom layer of the napkin. If you have a mini craft iron, it can be used to apply the decorative napkin to the fox. After brushing a thin layer of Mod Podge onto the fox, place the napkin design side down on top. Cover the napkin with parchment paper and use the craft iron to press down while moving over the fox. Once the parchment paper is removed, the napkin should be smooth. Use a craft knife to remove any excess napkin and sandpaper to smooth out the surface around the fox. Finally, apply a thin layer of Mod Podge to the top of the decorative paper and allow it to dry. To finish decorating all of the wooden foxes, just follow the same steps as before. Be sure to repeat the process for each individual fox.

Applying acrylic paint to wooden leaf embellishments


To begin, grab a paintbrush and coat your wooden leaf embellishments with acrylic paint. I opted for an orange hue and a deeper shade of red for my leaves. Additionally, I applied brown acrylic paint to the stems of the leaves.

Adding wooden foxes and leaf embellishments to twine

Wooden foxes with decoupage decorative napkin design, twine, floral cutters, wooden leaves, and faux floral on a table

Once your twine is prepared, you can begin adding your foxes and leaf embellishments onto it. Apply a small amount of hot glue at the back of each decoration once it is attached to the twine. This will prevent the decorations from rotating and guarantee that the front side is always facing outward.

Once you have added your twine with foxes and leaf decorations, you can complete the look by adding faux floral.  To do so, first remove the stems from each flower using floral cutters, leaving only the flower bud. Next, add each flower to the twine using a small amount of hot glue. 





Your fall fox garland is complete and looks beautiful displayed on a mantle, window, or door.

Did you enjoy this craft? Please share your thoughts in the comments below.

Pin Share Save

Pinterest pin image Fall fox garland with wooden leaf embellishments and faux floral



Comments

  1. Looks cute. At first I thought the leaves were lights. You know I like things that light up :) Thanks so much for linking up at the #UnlimitedLinkParty 130. Pinned.

    ReplyDelete
    Replies
    1. Dee, yes, I can't forget how you love things that light up. ✨️ If you put a tree up for Christmas, I'm sure it has many lights and is beautiful.

      Delete
    2. The tree yes but there's also candles and light up displays of all sorts :)

      Delete
    3. Oh yes, I figured you had all the light-up displays as well. 😊 I love it.

      Delete
  2. I have never tried an iron with mod podge before, I think I need to give it a try, I always dislike the wrinkles I seem to get when I use it. Your foxes look adorable, what a great way to bring in the fall Stephanie!

    ReplyDelete
    Replies
    1. Cara, this was my first time trying out the iron method and I really enjoyed it. It took less time compared to the other method I use. I was surprised at how well it works with eliminating the wrinkles. I hope that you have a wonderful weekend.

      Delete
  3. That is SO CUTE and looks pretty easy. I may have to try this with my boys!

    ReplyDelete
    Replies
    1. Leah, thank you! Yes, it is a pretty easy craft. I think you will love creating this with your boys. :)

      Delete
  4. Steph, this is precious! Pinned 📌.
    #20

    ReplyDelete
  5. That is a great idea for using wooden ornaments. Foxes are one of my favorite fall animals. Love the woodland theme! You're being featured on the #HomeMattersParty. Drop by my blog after 9 pm on Thursday to see your feature! https://lovemylittlecottage.com/

    ReplyDelete
    Replies
    1. Kristie, thank you so much. I'll be sure to drop by. :)

      Delete
  6. Very cute garland! We loved it so much at #HomeMattersParty that you're also being featured on my blog as well. Thanks for sharing!

    ReplyDelete
    Replies
    1. Allyson, thank you! I'm so happy you all enjoyed it. I'll be sure to stop by. :)

      Delete
  7. Visiting again to say thanks so much for linking up at #IMadeItMondayLinkParty 26. Pinned again.

    ReplyDelete
  8. i was just clicking around on the internet -- lol -- and came across the creatively crafty link party --- decided to join in the fun and been checking everyone's links --- this to too cute! i love the little foxes!!

    ReplyDelete
    Replies
    1. Diane, aw I'm glad you were able to come across her link party and visit my page. Thank you! Im happy to hear you enjoyed the foxes. 😊

      Delete
  9. Oh my word, what a cute garland. You always seem to find the perfect paper napkins for all your craft projects. This will be a feature over at Handmade Monday this week.

    ReplyDelete
  10. Your Fox Garland looks beautiful <3 Thank you for sharing the tutorial - using iron is new for me and I am going to try it :)

    ReplyDelete
    Replies
    1. Thank you so much. 😊 Yes, please give it a try. Using the mini iron helps make the process much easier when applying Mod Podge. Also, it gets rid of the wrinkles in the napkin. Thank you so much for visiting.

      Delete
    2. saved on 'to do list' and pined :) thank you for inspiration :*

      Delete
    3. Yay! You will just love how it turns out. Thank you. 🥰

      Delete
  11. Wonderful, thanks for sharing on craft schooling sunday!

    ReplyDelete
  12. Oh wow, these are super cute. I am going to show it to my granddaughter as I am sure she will love to make it.
    I visited you via The Happy Now Blog Link- Up #399
    I linked up this week with = 108+109. Hope you will join us M-S SeniorSalonPitStop and W-S #WordlessWednesday. You will find both under BLOGGING.

    ReplyDelete
    Replies
    1. Aw, thank you. I hope your granddaughter has fun creating her very own. :)

      Delete

Post a Comment

Thank you so much for taking the time to leave a comment. Your comments brighten my day. I hope that you know that it is appreciated. I do my best to respond to every comment. If you have a question, please feel free and ask away!

Popular posts from this blog

Easy 4th Of July Metal hanging design

 Hello everyone! How have you been? I wanted to share this super easy decoration with all of you. I created this simple metal hanging decoration for the 4th of July. I absolutely love how it turned out. I found this metal holder at my local Dollar Tree. I haven't seen it in the store before. I was excited to find this and brainstorm for my next project. As always, the material list is below. I will walk you through each step of creating your very own.  Video tutorial Materials One metal hanging holder Mod Podge  Tulle or ribbon Acrylic paint Craft foam block Foam scatter stars Faux flowers One decorative napkin Scissors Floral cutters Hot glue Three craft sticks Twine Applying paint to metal design Start by taking your paintbrush and applying your acrylic paint to your metal holder. I only used my paint on the metal surface. When applying the acrylic paint I noticed it does go on smoothly. You could prep the metal surface if you are concerned about the paint not adhering to the met

DIY Dollar Tree Floral Painted Tray

Hey everyone! Today, I want to show you how to transform a small Dollar Tree tray by adding painted floral art to give it a fresh new look. This DIY tutorial uses affordable supplies from Dollar Tree and is perfect for adding a personalized touch to your home decor. DIY Floral Painted Tray Video Tutorial Materials One small wooden tray - 5x7 inches Paintbrush Acrylic paint Mod Podge Applying paint to the tray Start by painting the main section of your tray Then, use a second paint color to cover the front and sides of the tray. For my tray, I used both white and light blue. Creating your flower vase Creating the flower vase was quite simple. I used a smaller paintbrush to create two lines opposite each other. After making the lines, I filled the middle section between them with paint. Creating your flowers I chose shades of purple, pink, blue, and yellow for my flowers. I created both smaller and medium-sized flowers using my smaller paintbrush. I created leaves using a mixture of ligh

Design your very own organizer using Dollar Tree Items

  Learn how to design and create your own personalized organizer using affordable Dollar Tree items. Get creative with materials and follow these easy DIY steps to make a unique and functional organizer for your home or office space. Hi everyone! I hope that you are doing well. Recently I took a trip to my local Dollar Tree and found these stackable plastic organizers.  Today we're going to design our very own organizer. To create your organizer you will only need a few materials. Most of my materials were purchased at my local Dollar Tree store. You will need three of the plastic organizing drawers.  Be sure to check out my YouTube channel for more DIY tutorials-- For more DIY Tutorials Click here! And I would love it if you subscribed to the channel DIY Organizer video tutorial below Materials THREE STACKABLE ORGANIZING DRAWERS 5X5X1.75 IN ASSORTED FAUX PEARL BEADS SMALL WOOD BEADS PEEL AND STICK FLORAL DECALS PEEL AND STICK DECORATIVE PAPER HOT GLUE PAINT- I'M USING ACRYLIC

Celebrate in Style: DIY Patriotic Napkin Rings

Hey everyone! I hope you're doing well. Today, I want to share an easy DIY project. We're going to make patriotic napkin rings using just a few materials. I usually find extra craft supplies in my craft bins because I often shop craft sales at the stores. I got the wooden stars and rings from my local Hobby Lobby store. The great thing about this project is that it's easy and quick. I'll provide you with a materials list and a step-by-step tutorial. Video tutorial Celebrate in Style: DIY Patriotic Napkin Rings Materials Acrylic paint  Gem strips (I'm using the gem strips from Dollar Tree)  E6000 or hot glue  Paintbrush  Wooden stars  Wood rings size 1.89in (4.8cm) Start by painting each of your wooden rings and stars. I chose to paint my rings white. Apply the paint to each ring's outer, back, and inner surface. For the stars, I went with red, white and blue. Next, we will attach the gem strips to each ring. Before adding the gem strips, attach each star to a wo

How to Create an Artificial Succulent Birdhouse Decoration

  Hello everyone! I have a quick and easy DIY craft project to share with you. I wasn't sure what to do with the second birdhouse I purchased at my local Dollar Tree a while back. If you follow me, you probably know how much I love succulents, especially faux ones. So, why not design a birdhouse with a faux succulent roof? I would love it if you could create one with me. The process is simple, and I'll take you through a full materials list. Video tutorial How to Create an Artificial Succulent Birdhouse Decoration To make the birdhouse design, you will need the following materials: - One craft birdhouse (you can buy it at Dollar Tree) - Assorted faux succulents - Craft moss - Artistic paint (Espresso in this case) - Paintbrush - Hot glue Applying paint to the birdhouse Start by applying acrylic paint to your birdhouse. Use Espresso color, and add a small amount of water to thin out the paint. This will result in a stained finish without having to use stain. After applying the p

DIY Mini Wood Lantern

  Hello everyone. I'm so excited to share this mini wood lantern craft with you all. I recently bought a box of wood tumbling blocks from Dollar Tree, and I wasn't sure what I was going to create with them. I decided since I also had some wood craft popsicle sticks on hand that I would use those with the blocks, and create a mini wood lantern. This project took around 30 minutes, but I promise you, you will just love how it all comes together with just a few materials. If you're ready, I'd love it if you created it with me!  Video tutorial Materials One pack of wood tumbling blocks  I purchased mine at my local Dollar Tree Ten wood craft popsicle sticks Paint  I'm using black paint, I also had some antique white paint on hand, but I went with black paint Hot glue Twine Faux floral, and greenery One medium-sized bead One battery-operated candle Floral snips Scissors Building the top and bottom sections of the lantern Start by taking five of your tumbling blocks. Usin

DIY Patriotic Book Stack using Dollar Tree Wooden Crate

Hey everyone! I hope you're doing well. Today, I want to share an easy DIY project with you. We'll make a patriotic book stack using a wooden crate from Dollar Tree. If you follow my blog, you probably know how much I enjoy creating these simple book stacks for different occasions. Video tutorial Create your very own Patriotic Book Stack  Here are the materials you'll need: - One wooden crate box (you can find these at Dollar Tree or any craft store) - Paintbrush - Acrylic paint in red, white, and blue - Faux floral - Twine or craft string - Sticker letters or a cutting machine to create your lettering and embellishments (I used my Cricut Machine to create the stars) Adding paint to the wooden crate  Start by painting the wooden crate box. Previously I had painted mine black, but for this project, I wanted to paint it red, white, and blue. I began by applying white paint over the black paint. Then, I added red and blue paint to two sections on the front of the box, leaving

How to Make a Charming Tea Bag Holder Using a Garden Pot and Wood Circle

  Are you a tea lover looking for a creative DIY project? Learn to create a unique tea bag holder using a garden pot, wood circle, wooden bead, and paper floral decorations. Get inspired and add a personal touch to your tea time. Today, we will make a tea bag holder using a garden ceramic pot and a wooden circle. This holder is both functional and cute. Below, I will provide a list of materials and step-by-step instructions. Video tutorial How to Make a Charming Tea Bag Holder Using a Garden Pot and Wood Circle Materials  Garden pot- I'm using a white 4inch planter pot (The one I am using is a ceramic pot)  One wood circle- I picked up a pack of 6  3'' wood circles at my local Walmart store for $1.80 Mod Podge Decorative napkin Paintbrush One medium or large wooden bead Paper flowers and leaves Adhesive Scissors White acrylic paint Letter stamps Stamp ink Preparing your decorative napkin and Mod Podge Let's begin by taking a decorative napkin and removing the second lay