Skip to main content

Upcycled glass jar design with paper floral embellishments

 Hello everyone! How are you all doing? I hope you are doing well. If you're anything like me, I have a few glass jars that I have washed and set aside, waiting for the perfect opportunity to use them in a craft. Today I am going to share a simple upcycled project with you. We're decorating a glass jar and adding paint, Mod Podge, and floral embellishments.



Video tutorial



Materials displayed on a table. Paper flowers, paintbrush, paint and Mod Podge.


Materials


One glass jar- I am reusing a pickle jar
Floral embellishments- I am using the paper craft flowers
Mod podge
Acrylic paint- I am using Waverly no prep Matte finish
Scissors
Paintbrushes
Optional-Twine

Applying paint to the glass jar

Glass jar with paint and paintbrush on a table

Begin by taking your paintbrush and applying a thin layer of your paint to your jar. Add a lighter paint application if you want to add a battery-operated candle to your jar. This way you will still be able to see light through your jar.

Adding Mod Podge and paper flowers to a glass jar

Painted glass jar with Mod Podge, paintbrush, and paper flowers nearby on table

Next,  after applying your paint, take your flowers and begin to add them using your paintbrush and Mod Podge.


Paintbrush with Mod Podge applied to yellow paper flower on glass jar

Add a thin layer of Mod Podge to the glass surface and add your flower embellishments. After, apply a coat of Mod Podge over your flower. I always use my blow dryer when applying my Mod Podge. Allow it to fully dry.

Hand holding up a yellow paper flower above painted glass jar

Repeat the previous step. Continue to add your flowers and Mod Podge to your glass jar.

Glass jar with paper flowers and craft leaves nearby on a table

I  also added leaves to my design.

Adding twine to the glass jar

Glass jar, scissors, and twine on a table

This last step is optional. Take some twine and wrap it around the opening of your jar. Tie it off, and wrap it around until you reach the desired amount. Take scissors and cut off the remaining twine. Use a little hot glue and glue the end of your twine to the jar.

Completed glass jar decoration on display

What do you think? That was pretty simple. I love that this is an upcycled craft. Here are a few ideas. You can add a battery-operated candle and place it on a patio table. Enjoy the soft lighting during the evening. You can also use this glass jar to display a summer or fall flower arrangement.  
Thank you so much for creating with me.

Pin Share Save

completed glass jar design with title for pinning on Pinterest

Comments

  1. Oh, I love it. You need to open a shop :) Thanks so much for linking up at the #UnlimitedLinkParty 122. Pinned.

    ReplyDelete
    Replies
    1. Dee, aw thank you! I really should consider opening a shop again. Thanks so much.

      Delete
  2. This is such a beautiful idea. Thank you for sharing :)

    ReplyDelete
    Replies
    1. I'm so happy to hear that you enjoyed it. Thank you so much for stopping by.

      Delete
  3. This is darling Stephanie! I have so many glass jars I have been saving, now I have an idea of what to do with them. Thank you for sharing your inspiration!

    ReplyDelete
    Replies
    1. Aw, thank you. I'm so happy to hear that you enjoyed this craft. I love upcycling glass jars.

      Delete
  4. AWESOME upcycle, Steph! We will be featuring you starting Wednesday at the Creative Crafts Linky Party! Pinned and shared!
    Creatively, Beth

    ReplyDelete
    Replies
    1. Beth, thank you so much. I'm thrilled to be featured on Creative Crafts!

      Delete
  5. Replies
    1. Lyndsey, thank you so much. I'm so happy to hear that you enjoyed this craft. :)

      Delete
  6. Stephanie, CONGRATS! Your post is FEATURED at the #UnlimitedLinkParty 123!

    ReplyDelete
  7. It is a pretty result on a plain jar

    ReplyDelete
  8. Great video Steph! Okay, so question. What kind of brush do you use and how do you avoid seeing mod podge brush strokes on the completed project? I've been doing some things with Mod Podge and dried flowers and such on jars lately and I have trouble with seeing brush strokes. Is there a trick or is this common and me just being anxious about it? Lol. Pinned 📌
    Thanks bunches for sharing this tutorial with Sweet Tea & Friends this month, dear friend.

    ReplyDelete
    Replies
    1. Hi Paula! These are great questions. I normally use a soft bristle paintbrush when I apply my mod podge. The Paintbrushes I am using are from Walmart. I bought a set of brushes.

      I like to dry my mod podge surface between each coat. I have noticed applying a few coats and drying between each coat really helps with minimizing those lines.

      Also, don't worry too much if you see a few lines. There is always beauty in imperfections. 🥰 I also applied a thin coat of paint before applying the mod podge, so that helped too. Just experiment with it a little more. I am sure what you are creating is beautiful. And if you are ever up to it, I would love to see pictures of your creations. 😊

      Delete
  9. Visiting again to say thanks so much for linking up at #IMadeItMondayLinkParty 22. Pinned.

    ReplyDelete
  10. Stephanie, CONGRATS! Your post is FEATURED at #IMadeItMondayLinkParty 23.

    ReplyDelete
    Replies
    1. Dee, thank you so much! I'll be sure to stop by =)

      Delete
  11. Hi - Visiting from the Sunday Sunshine blog party. This is great - its so versatile, you can make one for every holiday or season!

    ReplyDelete
  12. Thanks for sharing with us - I'm featuring you this week when the next To Grandma's house we go link party starts!

    ReplyDelete
  13. SO pretty! Those paper flowers look so much like real pressed flowers!

    ReplyDelete
  14. Such a pretty jar. I'm visiting from Handmade Monday.

    ReplyDelete
    Replies
    1. Linda, thank you very much. I appreciate you visiting. 😊

      Delete
  15. So sweet! Must try this! Thanks for joining in on Home Matters Linky Party! I will be featuring your post this week! #HomeMattersParty xx

    ReplyDelete
    Replies
    1. Joy, thank you so much. I'm happy you enjoyed it. And thank you for the feature.

      Delete
  16. You're so creative Stephanie!
    Visiting from Paula's linky today where we're sitting together.
    Blesings, Jennifer

    ReplyDelete

Post a Comment

I love hearing from you! Your comments and creative ideas truly brighten my day. I do my best to respond to everyone, so if you have a question or just want to say hello, please leave a note below. To keep our community a positive and inspiring space, spam or off-topic comments will be removed. Happy crafting!

Popular posts from this blog

DIY Budget-Friendly Succulent Plant Hanger Design

 Hi everyone! I hope that you are doing well. Today I am sharing an easy DIY craft that is budget-friendly, and easy to create. A material list will be provided, along with step-by-step instructions on creating your very own. Be sure to check out the video tutorial below. Video tutorial Materials One 4x4 framed art Acrylic paint Faux succulents Hot glue and any other heavy-duty adhesive Twine Scissors  Floral cutters Paintbrush You can find most of these materials at your local Dollar Tree This project costs under five dollars If your frame comes with beads as shown in the picture above, take your scissors and remove the beads. You will actually reuse the beads later on in this craft. Take the inner section of your out and set it aside. Next, take your acrylic paint and paintbrush, and begin to apply your paint to your frame. I applied three coats of my paint to my frame. Next, use your paintbrush you apply paint over the inner section of the frame we removed earlier. I applie...

DIY Magnetic Faux Succulent & Floral Lids — Upcycled Fridge Accent

I created these magnetic faux succulent and floral lids using some metal jar tops that I had saved. With a little creativity, they transformed into charming, lightweight accents that add a pop of color and personality to the fridge. Each lid features its own tiny arrangement—part succulent and part floral—all crafted with intention and charm. This project is easy and budget-friendly, allowing you to use items you already have while adding a lovely touch to your home. Quick Video Tutorial Coming Soon Materials Metal jar lids (one large, one small) Letter beads (to spell LOVE ) Faux moss Faux succulents Faux vines Faux flowers (pink, green foliage, white accents) Hot glue gun and glue sticks Magnets I began with the larger metal lid, attaching small letter beads to spell out LOVE . This created a meaningful little focal point and set the tone for the rest of the design. Next, I glued a layer of faux moss along the bottom of the lid. The moss added softness and helped anchor...

Easy Breezy DIY: How To Make Summer Coasters

Happy Summer! I'm excited to share this simple DIY craft with you. I found some cute summery napkins at my local Dollar Tree and knew I wanted to create another summer craft, but I wasn't sure what I wanted to create. Today I will show you how to create these simple summer coasters that are perfect for the season. Video tutorial Easy Breezy DIY: How To Make Summer Coasters Materials: - Round wood circles - Napkins - Mod Podge (I'm using the dishwasher-safe one) - Acrylic paint - Paintbrush - One cork sheet (I'm using the adhesive cork sheet from Dollar Tree) Begin by taking your adhesive cork sheet and flipping it over so that the adhesive backing is facing up. Next, take a pencil and start to trace each of your round wooden circles. Then, take your scissors and cut out each of the traced circles. You can use a craft knife to make any necessary adjustments.  After that, take your circles and begin to remove the back of each of the cork circles exposing the sticky backin...

Upcycled Plastic Bowl Hanging Planter

  Hi everyone! I hope that you are doing well. I had a few microwavable noodle bowls that I washed out and put away. I took a few days to think about what I could create using these bowls. It finally came to me, and I decided I would take one of the plastic bowls, and upcycle it. We will take this plastic bowl, and create a hanging planter. I will take you through each step, and as always I will provide a video tutorial. If you're ready, create with me! Hanging planter video tutorial Materials One Plastic Bowl  I'm reusing a plastic noodle bowl One hole puncher Twine You will need four sections of twine, of the same length. River pebbles, or craft rocks  I purchased river pebbles at my local Dollar Tree. Medium size wood beads (optional) Paint I'm using Acrylic chalk paint. Color is called mineral.l Hot glue Faux succulents, and vines Craft foam blocks Paintbrush or sponge brush Scissors Floral snips Begin by taking your hole puncher, and punching out four holes in your ...

Decorative Wooden Cutting Board

 Hello everyone!  Today, we are creating a simple design. I am taking a wooden cutting board and adding a few design elements to it. I thought this would be a great addition to a tray, or just to add along with my existing decor. I will include a materials list below, and also, there will be one within the video. Thank you so much for coming along and creating with me. Video tutorial Materials One small wooden cutting board Decorative wrapping paper or tissue paper Acrylic paint Paintbrush Twine or rope Hot glue One heart decoration Scissors Wooden letters Mod podge Optional- Faux greenery One pencil for tracing Tracing and cutting the wrapping paper To begin, place your wrapping paper on a flat surface. Take your wooden cutting board and put it on top of your paper. With a pencil, trace around the board onto the wrapping paper. After tracing, use scissors to cut out the traced shape. Next, lay your cut-out wrapping paper on top of your wooden cutting board.  I decided th...

Search This Blog

All content Copyright

Copyright 2021-2026 I ask that you do not take or use my photos or words without permission. If you have any questions, please feel free and contact me. Also, for more information on this blog, check out the disclosure policy tab above. Thank you