Skip to main content

DIY Budget-Friendly Succulent Plant Hanger Design

 Hi everyone! I hope that you are doing well. Today I am sharing an easy DIY craft that is budget-friendly, and easy to create. A material list will be provided, along with step-by-step instructions on creating your very own. Be sure to check out the video tutorial below.

Hanging faux succulents in picture frame design

Close-up of faux succulent and hanging frame design

Video tutorial


Craft materials such as, paint, floral cutters, sponge brush, faux succulents, and framed art

Materials

One 4x4 framed art
Acrylic paint
Faux succulents
Hot glue and any other heavy-duty adhesive
Twine
Scissors
 Floral cutters
Paintbrush

You can find most of these materials at your local Dollar Tree
This project costs under five dollars

Acrylic paint, sponge brush and framed art on a table

If your frame comes with beads as shown in the picture above, take your scissors and remove the beads. You will actually reuse the beads later on in this craft. Take the inner section of your out and set it aside. Next, take your acrylic paint and paintbrush, and begin to apply your paint to your frame.
I applied three coats of my paint to my frame.

Painted framed on a table

Paint near painted frame and paintbrush

Next, use your paintbrush you apply paint over the inner section of the frame we removed earlier. I applied my white paint since the board had writing on it. I gave it around two coats of paint and after I used my blow dryer to give it a quick dry.

Twine, painted frame, adhesive and scissors on a table

Once you have painted the board, take it and pop it back into place on your frame. Now you are ready to begin cutting strands of your twine. Take your twine and cut four strands of the same size. You will need to determine how low you will want your plant hanger to be when cutting your twine. 

Twine, painted frame and adhesive on a table

Next, using your adhesive, begin to attach each strand of twine to the corners of your frame. I decided to use this all-purpose Loctite adhesive along with my hot glue. You can use any heavy-duty adhesive that you have on hand.  

Painted frame with attached twine and beads

Now you are ready to use your beads in your design. I decided to add two beads to each strand of twine. If your frame did not come with the beads like my frame did, you can also just add your own beads, or create this without the beads as well.

Painted frame and wooden beads attached and faux succulents

Next, take your floral cutters and begin to cut your succulents to size.

Hand holding faux succulent over painted frame

After, take each succulent flower and begin to glue them down in the middle of your frame.  Once you add all of your succulents, take your four strands of twine and bring them together at the very top. Make sure that when you lift your frame up by the twine, your plant hanger is leveled. Tie off the top of the twine in a knot.

Completed Close-up of succulent plant hanger design

This craft was super simple to create, budget-friendly, and takes very little time.
I hope you enjoyed creating this with me. Be sure to let me know if you decide to create your very own succulent plant hanger.

Hanging succulent planted hanger design displayed outdoors

If you enjoyed this craft you may also be interested in this craft-UPCYCLED PLASTIC BOWL HANGING PLANTER

Thank you so much for stopping by and creating with me. I'll see you soon.

Pin Share Save

Succulent plant hanger design Pinterest image with text

Comments

  1. I love succulents and have them all over my home! I like this DIY!! Thanks so much for linking up at the #UnlimitedLinkParty 109. Shared.

    ReplyDelete
    Replies
    1. Dee, thank you! Succulents are beautiful. :) Always a pleasure linking up at your link party.

      Delete
  2. Oh wow, I love succulents! As a kid in SA my dad had a HUGE succulent garden, and its still one of my favorite type of plants. This idea you have of the plant hanger is so gorgeous. I think I need to do something like this but with real succulents.
    I visited you via Crafty Creators Link Party #64
    If you are not already part of SSPS, this is a personal invite to hop over and come and share your posts with us at Senior Salon Pit Stop, every Monday to Saturday.
    See my entries: 21+22+23 and then navigate to the bottom of my page for the Senior Salon Pit Stop linkup, we hope to meet you there virtually

    ReplyDelete
    Replies
    1. I love that your dad had a huge succulent garden. I am sure it was beautiful. I love the idea of using real succulents! Thank you so much for stopping by, and I will be sure to check out your link party. :)

      Delete
  3. I'm featuring you this week when the next To Grandma's house we go Wednesday link party starts - thanks for sharing with us!

    ReplyDelete
    Replies
    1. Thank you so much! I'll be sure to stop by. :)

      Delete
  4. Wonderful little tutorial. It turned out so adorable. This post will be a feature this week. #HomeMattersParty

    ReplyDelete
    Replies
    1. Donna, thank you so much! I appreciate it. :)

      Delete
  5. I love this Stephanie, something I do not need to worry about keeping alive is a win in my book! So clever to use the sign as the base for the succulents. I love them, you may be amazed I am working on a small garden of them. If they do not make it on their own, then there is no hope for them!

    ReplyDelete
    Replies
    1. Aw, thank you so much. I love succulents so much and lately I have been using faux succulents in my designs. A small succulent garden sounds lovely. I love that so much.

      Delete
  6. This is so cute Stephanie! Love the use of faux succulents because I kill absolutely every single living thing that comes in my house that doesn't breathe lol! My so whispered to the plants that I bought last year at Walmart on the way to the car, "Sorry my mom chose you. You're going to die soon. So, so sorry guys." LOL! I have a few of the Dollar Tree signs, so all I need is a few succulents. Thanks for sharing on Crafty Creators!!
    Niki | Life as a LEO Wife

    ReplyDelete
    Replies
    1. Niki, you are so cute! You made me laugh so much when I read your comment. I've killed a few plants, but I've learned when you keep at it, with just a little practice and patience, it comes together. Thanks so much for stopping. And it is always a pleasure sharing on Crafty Creators.

      Delete
  7. Steph, this is just lovely. Thanks for sharing this tutorial with Sweet Tea & Friends this month dear friend.

    ReplyDelete
  8. This is absolutely adorable!! How clever! I love succulents, but for some reason I do have trouble keeping them alive, so this is perfect for me. I've featured this post today at Thursday Favorite Things. :)

    ReplyDelete
  9. Such a clever idea, it looks so modern and chic.

    ReplyDelete
  10. Congratulations, Steph, as you are being featured at SSPS 306. See you again next week https://esmesalon.com/tag/seniorsalonpitstop/

    ReplyDelete
  11. Such a BRILLIANT idea Steph! You are so very creative!

    ReplyDelete
  12. These look so lovely, I almost forgot these were faux succulents.

    ReplyDelete
    Replies
    1. Thank you so much! Some of these faux succulents sure do look real. :)

      Delete

Post a Comment

I love hearing from you! Your comments and creative ideas truly brighten my day. I do my best to respond to everyone, so if you have a question or just want to say hello, please leave a note below. To keep our community a positive and inspiring space, spam or off-topic comments will be removed. Happy crafting!

Popular posts from this blog

DIY Magnetic Faux Succulent & Floral Lids — Upcycled Fridge Accent

I created these magnetic faux succulent and floral lids using some metal jar tops that I had saved. With a little creativity, they transformed into charming, lightweight accents that add a pop of color and personality to the fridge. Each lid features its own tiny arrangement—part succulent and part floral—all crafted with intention and charm. This project is easy and budget-friendly, allowing you to use items you already have while adding a lovely touch to your home. Quick Video Tutorial Coming Soon Materials Metal jar lids (one large, one small) Letter beads (to spell LOVE ) Faux moss Faux succulents Faux vines Faux flowers (pink, green foliage, white accents) Hot glue gun and glue sticks Magnets I began with the larger metal lid, attaching small letter beads to spell out LOVE . This created a meaningful little focal point and set the tone for the rest of the design. Next, I glued a layer of faux moss along the bottom of the lid. The moss added softness and helped anchor...

Easy Breezy DIY: How To Make Summer Coasters

Happy Summer! I'm excited to share this simple DIY craft with you. I found some cute summery napkins at my local Dollar Tree and knew I wanted to create another summer craft, but I wasn't sure what I wanted to create. Today I will show you how to create these simple summer coasters that are perfect for the season. Video tutorial Easy Breezy DIY: How To Make Summer Coasters Materials: - Round wood circles - Napkins - Mod Podge (I'm using the dishwasher-safe one) - Acrylic paint - Paintbrush - One cork sheet (I'm using the adhesive cork sheet from Dollar Tree) Begin by taking your adhesive cork sheet and flipping it over so that the adhesive backing is facing up. Next, take a pencil and start to trace each of your round wooden circles. Then, take your scissors and cut out each of the traced circles. You can use a craft knife to make any necessary adjustments.  After that, take your circles and begin to remove the back of each of the cork circles exposing the sticky backin...

Upcycled Plastic Bowl Hanging Planter

  Hi everyone! I hope that you are doing well. I had a few microwavable noodle bowls that I washed out and put away. I took a few days to think about what I could create using these bowls. It finally came to me, and I decided I would take one of the plastic bowls, and upcycle it. We will take this plastic bowl, and create a hanging planter. I will take you through each step, and as always I will provide a video tutorial. If you're ready, create with me! Hanging planter video tutorial Materials One Plastic Bowl  I'm reusing a plastic noodle bowl One hole puncher Twine You will need four sections of twine, of the same length. River pebbles, or craft rocks  I purchased river pebbles at my local Dollar Tree. Medium size wood beads (optional) Paint I'm using Acrylic chalk paint. Color is called mineral.l Hot glue Faux succulents, and vines Craft foam blocks Paintbrush or sponge brush Scissors Floral snips Begin by taking your hole puncher, and punching out four holes in your ...

Decorative Wooden Cutting Board

 Hello everyone!  Today, we are creating a simple design. I am taking a wooden cutting board and adding a few design elements to it. I thought this would be a great addition to a tray, or just to add along with my existing decor. I will include a materials list below, and also, there will be one within the video. Thank you so much for coming along and creating with me. Video tutorial Materials One small wooden cutting board Decorative wrapping paper or tissue paper Acrylic paint Paintbrush Twine or rope Hot glue One heart decoration Scissors Wooden letters Mod podge Optional- Faux greenery One pencil for tracing Tracing and cutting the wrapping paper To begin, place your wrapping paper on a flat surface. Take your wooden cutting board and put it on top of your paper. With a pencil, trace around the board onto the wrapping paper. After tracing, use scissors to cut out the traced shape. Next, lay your cut-out wrapping paper on top of your wooden cutting board.  I decided th...

Search This Blog

All content Copyright

Copyright 2021-2026 I ask that you do not take or use my photos or words without permission. If you have any questions, please feel free and contact me. Also, for more information on this blog, check out the disclosure policy tab above. Thank you