Skip to main content

Upcycled Glass Jar Fall Décor With Leaf Lights

Hello everyone. I hope this week is treating you well. Today we are creating a very simple decoration. I decided to upcycle a glass jar and turn it into a Fall decoration. If you have any glass jars with lids, this craft is perfect for reusing those jars.

Fall glass decoration filled with lights, and leaf and pumpkin on the top lid

Video tutorial



materials such as mini leaf lights, faux leaves, candle holder, paint, and hot glue

Materials

One glass jar with a lid
One candleholder
One faux mini pumpkin
Paint
Craft rope
Fall fabric leaves
Hot glue
Harvest leaf lights

Video tutorial




Paint, and glass candleholder on a table

Painted glass candleholder on a table


Start by applying paint to your glass candleholder.  I gave my candleholder around two coats of paint. I went ahead and used my blow dryer between coats. 



Paint near a lid on a table

Painted lid on a table


Next, take the lid from your glass jar and apply some paint. I applied two coats of paint to my lid.

Two paint bottles and white foam pumpkin on a table


Apply paint to your mini pumpkin. I decided to combine two paint colors. I used orange and red for my pumpkin.  If you decide to leave your pumpkin as is, that is just fine. 

Glass jar, craft rope and scissors on a table

glass jar with craft rope wrapped around top section


Take your craft rope and begin to add it to your glass jar using your hot glue. Be sure that when adding your rope, add it just below the section where the lids screw onto it. Take your scissors cut off any remaining rope and glue the ends down.

two craft leaves, painted mini pumpkin and lid on a table


After, take your painted lid and glue it on your faux fall leaves. Once you add your leaves, take your mini pumpkin and glue it in the middle on top of your leaves.

painted candleholder next to glass jar


You are now ready to attach your jar to your candleholder. Using some hot glue, add it to the top section of your candleholder. Once you have added your glue, take your glass jar and place it on top.

completed glass jar fall décor


All that is left is to add your fall leaf lights inside your glass jar. You can still place your lid on top, and I was able to turn my lid even with the wire from my lights. 

You can easily use this as a light display, or a fall candy jar. 


glass jar fall decor with leaf lights displayed on windowsill near faux sunflowers

Your upcycled fall glass jar decoration is complete! Thank you so much for stopping by and creating with me. Be sure to check out the video tutorial within this post. Also, I will include a link to my YouTube channel where you can find more DIY projects and fun crafts! I'll see you soon. 


Pinterest pin with imagine of glass jar fall décor and text





















Pin/Share/Save



Labels:
Location: Colorado, USA

Comments

  1. Dee | GrammysGrid.comSeptember 13, 2023 at 11:45 AM

    I love everything about this! You really need a shop :) Thanks so much for linking up at the #UnlimitedLinkParty 129. Pinned.

    ReplyDelete
  2. Dee | GrammysGrid.comSeptember 17, 2023 at 5:41 PM

    Visiting again to say if you had a shop, I'd have scooped this up and bought it right away :) I didn't watch the video last time but did just now. It was so relaxing watching you put that all together! Thanks so much for linking up at #IMadeItMondayLinkParty 24. Pinned.

    ReplyDelete
    Replies
    1. StephanieSeptember 17, 2023 at 5:55 PM

      Dee, aw you made my day! Thank you so much. I need to open another shop. I'm happy to hear that you found the video relaxing.

      Delete
  3. Dee | GrammysGrid.comSeptember 24, 2023 at 3:31 AM

    Stephanie, CONGRATS! Your post is FEATURED at #IMadeItMondayLinkParty 25.

    ReplyDelete

Post a Comment

Thank you so much for taking the time to leave a comment. Your comments brighten my day. I hope that you know that it is appreciated. I do my best to respond to every comment. If you have a question, please feel free and ask away!

Popular posts from this blog

DIY Wood Riser with Floral Design

 Hello everyone! I hope you're doing well. Today, I'm excited to share a beautiful wood riser you can use to decorate your home. We'll be creating it using only a few materials, and for this project specifically, I'll be using the unfinished rectangle natural wood box from Walmart. I'll provide a detailed list of all required materials and step-by-step instructions. Video tutorial DIY Wood Riser with Floral Design Materials Unfinished rectangle natural wood box -6" x 8" x .75" 3" peg people (these are used for the legs on the wooden riser) Adhesive (I'm using Hot glue) You can also use E6000 Decorative floral napkin Mod Podge 7" One unpainted wood home word sign Scissors Paintbrush Applying paint to wood frame and home sign Begin by applying paint to the wooden box and the home word sign. Mix two paint colors together and use them for the wooden box and home sign. Adding the decorative napkin and Mod Podge Next, use scissors to cut out d
6 comments
Read more

Three Easy Mason Jar Designs

 Hello! Today we'll be making three designs for mason jars. This project is quite simple and requires only one mason jar. We'll create three themes - a star/4th of July theme, a succulent theme, and a summer floral theme. For this craft, I had everything except for my decorative buttons. I managed to find two packs of decorative buttons at my local Walmart - one had cacti designs, and the other had floral designs. I'll take you through each step of how I used these buttons for the project.   Video tutorial Materials  One mason jar- You will only need one jar for this project Foam block- We are using three sections from the foam block.  Craft knife- Used for cutting the foam block if not already cut into sections Hot glue Paint brushes Decorative buttons, or any other decorative item Floral Paint- I'm using chalk paint on my mason jar. You will also need paint for your wooden stars if you are using them. Twine Optional-Foam stars Creating your Star/4th of July design Sta
16 comments
Read more

Dollar Tree Mini Bead Floral Spring Wreaths

Transform Dollar Tree's mini bead wreaths into beautiful spring floral bead wreaths with this easy DIY tutorial. Add a touch of spring to your home decor with this creative and budget-friendly project.  I'm excited to share a quick and simple DIY project with you today. Last year, I purchased two mini bead hanging decorations displayed with the fall decor. I decided to add them to my craft stash and use them in the springtime. In this tutorial, I will show you how to create mini bead floral wreaths and provide a full list of materials needed for each step.  Dollar Tree Mini Bead Floral Spring Wreaths Video tutorial Materials Round mini beaded hanging decorations Artificial floral accents One large craft/popsicle stick Paintbrush Acrylic paint Floral cutters Hot glue/Adhesive Step one: Applying paint Before painting, remove any previous decorations such as the plaid autumn leaves that were attached to the wreaths I'm using. To start with, apply paint to your beaded wreath. Y
15 comments
Read more

DIY Mini Wood Lantern

  Hello everyone. I'm so excited to share this mini wood lantern craft with you all. I recently bought a box of wood tumbling blocks from Dollar Tree, and I wasn't sure what I was going to create with them. I decided since I also had some wood craft popsicle sticks on hand that I would use those with the blocks, and create a mini wood lantern. This project took around 30 minutes, but I promise you, you will just love how it all comes together with just a few materials. If you're ready, I'd love it if you created it with me!  Video tutorial Materials One pack of wood tumbling blocks  I purchased mine at my local Dollar Tree Ten wood craft popsicle sticks Paint  I'm using black paint, I also had some antique white paint on hand, but I went with black paint Hot glue Twine Faux floral, and greenery One medium-sized bead One battery-operated candle Floral snips Scissors Building the top and bottom sections of the lantern Start by taking five of your tumbling blocks. Usin
16 comments
Read more

🎄🌟Easy Christmas Gift Wrapping Ideas

Get creative this holiday season with these easy Christmas gift-wrapping ideas. From simple and elegant to fun and festive, find inspiration for wrapping your gifts in style. I’m going to share some quick gift-wrapping decorating ideas with all of you. I grabbed a few empty boxes and my red and brown gift paper. Although I’m not a professional when it comes to wrapping paper, I thought I would share some decoration ideas with all of you. I had all of my materials on hand, but a lot of these are fairly cheap when purchased at a craft store. Let’s decorate! Check out the video tutorial   Materials Wrapping paper Mini garland Acrylic paint Paintbrush Decorative gems Twine or craft rope Decorative tape Tape Hot glue Scissors Wooden Christmas mini decorations (such as a mini wood wreath and an ornament) Gift wrap decoration number one For the first design, I am using brown wrapping paper, tape, red paint, green paint, white paint, two wooden Christmas decorations, hot glue, and twine to cre
18 comments
Read more

DIY Spring Flower Terra Cotta Pot

Hello everyone! Today, I'm excited to share a simple re-do craft that will transform a plain terra cotta pot into a beautiful spring gift. I'm reusing one of my old terra cotta pots from a previous project for this craft.-  Spring Floral Clay Pot Design  With just a few easy steps, I'll show you how to create a stunning spring flower pot display that would make the perfect Mother's Day gift, or just to welcome Spring. Let's get started! DIY Spring Flower Terra Cotta Pot Video tutorial Materials Artificial flowers One terra cotta pot (I'm reusing a pot from a previous craft) Acrylic paint Craft stick Faux pearl embellishments Foam block Adding paint and other designs I used a pot that was previously painted and had some twine added to it. I decided to keep the existing paint and twine and add a few painted flowers to the pot. For the flowers, I used light purple and blue for the petals, and white for the center of each flower. Adding embellishments I decided to a
18 comments
Read more

DIY Dollar Tree Nail Polish Organizer

  Hello there! I'm delighted to have you on the blog today. Are you seeking a creative DIY idea to organize your nail polish collection? If yes, then you have come to the right place.  Today, I will share a simple and functional method to organize your nail polish collection using only three main materials. You will need stock paper, gem strips, and a three-compartment plastic organizer, all of which can be purchased from your local Dollar Tree or craft store. Video tutorial  DIY Dollar Tree Nail Polish Organizer These are the things you'll need:  A plastic three-compartment organizer  Gem strips  Shimmery cardstock (found a pack at Dollar Tree)  Hot glue  Scissors and a pencil Tracing the organizer onto cardstock  To create your nail polish organizer, first, place the plastic organizer on top of the cardstock, and trace the shape of the organizer on the cardstock using a pencil. Don't worry if it could be better, just focus on tracing the shape as accurately as possible. C
2 comments
Read more

Wood Box With Glass Bottles Decorative Centerpiece

Hi everyone! I hope that you are all doing well. It has been pretty rainy these past few days. I'm enjoying the rainy weather compared to the really hot days we were getting before.  Today we are working on building a wood box centerpiece. Instead of using the wood crate boxes from Dollar Tree, I wanted to build my own box. For this project, we're using a wood fence picket. I paid $1.48 for one picket, and you can create two boxes with just this one picket. I'm also going to reuse my glass Frappuccino bottles. I will provide a video tutorial as well.  Video tutorial Materials   One wood fence picket- I purchased mine at my local Lowe's for $1.48 Two glass bottles-I am reusing my Starbucks glass bottles Paint Paintbrush Faux greenery Rub-on transfers Wood glue Corner clamps Hot glue One round wooden circle Floral snips Scissors Begin by cutting your wood fence picket. Cut the short ends of your wood 2½ inches. Next, cut the front, back, and bottom of your wood 6¼ inches.
15 comments
Read more