Skip to main content

3 Ways To Decorate Wood Pumpkins

 Hi everyone! I hope that you are all doing well. I created these adorable pumpkin decorations and wanted to share them with you. I'm going to take you through three different design styles for each pumpkin. This is a pretty simple project and takes just a few materials. 


Check out the video tutorial! 




Materials

Three wood pumpkins
I purchased a pack of these pumpkins at Walmart. They actually come with string for hanging

Mod Podge

Paint

Wood tile letters

Decorative napkin

Scissors

Hot glue

Twine

Faux fall floral

Wood beads

Paintbrush



For my first pumpkin design, I mixed two paint colors together.
I used my chalk paint, and milk jug and mixed it with a red acrylic paint I had on hand. I used brown to paint the stem of my pumpkin.


Next, I decided to add a leaf, and two flowers. I used my hot glue and added them to my pumpkin.


That completes our design for pumpkin number one.




For my second design, I painted my pumpkin white and the stem a light green.  After allowing my pumpkin to dry, I used my mod podge and added that to the middle section of my pumpkin.

Using your scissors, cut out a small section of your decorative napkin. 


Take your napkin and add it to the middle section of your pumpkin over your mod podge. Apply a second coat of mod podge over your napkin.


Next, take your scissors and cut a small section of twine.  I decided to add four wooden beads to my twine. I tied off a knot at the end of my last bead. Take the top section of your twine and pull it through the holes in your pumpkin. Once you have pulled your twine through, tie off a knot. Use your scissors to cut off any of the remaining twine.


Your second design is complete. 



I decided for my final design that I would use my wood tile letters.


I applied a paint color called celery and I used brown to the pumpkin stem.
After, I took my hot glue and added a little glue onto each wood tile. I added my tiles down the center of my pumpkin. 

After, I took my leaf, and floral and added that to the top section of my pumpkin.


That completes the last pumpkin design. 

I think these wood pumpkins look great on a tiered tray. You could also take a string to hang and display them above a mantel, or above an entryway. 

Thank you so much for stopping by and creating with me. I'll see you soon.

Pin/Share/Save




Comments

  1. How cute. I think the white one is my fav. Thanks so much for linking up at A Themed Linkup 121 for Fall Crafts and Décor. Shared.

    ReplyDelete
    Replies
    1. Thank you so much! I'm so happy to hear you enjoyed this craft. ❤️

      Delete
  2. I was just getting ready to comment that I like them all but that the white one is my fav, then I saw I had said the same thing last year :) Anyway, thanks so much for linking up at the #UnlimitedLinkParty 127. Pinned.

    ReplyDelete
    Replies
    1. I love the white pumpkin as well. :) Thank you.

      Delete
  3. Stephanie, CONGRATS! Your post is FEATURED at the #UnlimitedLinkParty 128!

    ReplyDelete
  4. I like your ideas for pumpkins decorations :) the white one is my favourite, but they all look beautiful. Thank you for sharing the tutorial :)

    ReplyDelete
  5. These are great! I love that we can decorate with pumpkins for two months!! Visiting from the Pam's Parties and Practical Tips.

    ReplyDelete
  6. These little pumpkins would cheer up any room.
    Amalia
    xo

    ReplyDelete

Post a Comment

I love hearing from you! Your comments and creative ideas truly brighten my day. I do my best to respond to everyone, so if you have a question or just want to say hello, please leave a note below. To keep our community a positive and inspiring space, spam or off-topic comments will be removed. Happy crafting!

Popular posts from this blog

Summer Craft: DIY Paper Plate Watermelon Flower Hanger

Hey everyone! I'm excited to show you a fun and easy craft. Today, we will be making a summer watermelon floral hanging design using a paper plate. This DIY project is easy to create and fun to welcome the summer season. You'll make this watermelon floral hanging design to display your artificial flowers creatively. It's also a great way to use any extra paper plates you may have lying around and aren't sure what to do with. You may have extras from a birthday party or a BBQ. If you're ready, let's get started creating your floral hanging design! Video tutorial Summer Craft: DIY Paper Plate Watermelon Flower Hanger Materials: - Paintbrush - Artificial flowers - Paper plate (any size you prefer) - String or craft twine - Scissors - Hot glue Optional-Hole Puncher Start by cutting the paper plate in half. Use a darker green paint to cover the bottom area of the plate. Let it dry between each coat of paint. Continue applying paint to each area of the plate. Then, ad...

DIY Budget-Friendly Succulent Plant Hanger Design

 Hi everyone! I hope that you are doing well. Today I am sharing an easy DIY craft that is budget-friendly, and easy to create. A material list will be provided, along with step-by-step instructions on creating your very own. Be sure to check out the video tutorial below. Video tutorial Materials One 4x4 framed art Acrylic paint Faux succulents Hot glue and any other heavy-duty adhesive Twine Scissors  Floral cutters Paintbrush You can find most of these materials at your local Dollar Tree This project costs under five dollars If your frame comes with beads as shown in the picture above, take your scissors and remove the beads. You will actually reuse the beads later on in this craft. Take the inner section of your out and set it aside. Next, take your acrylic paint and paintbrush, and begin to apply your paint to your frame. I applied three coats of my paint to my frame. Next, use your paintbrush you apply paint over the inner section of the frame we removed earlier. I applie...

Easy DIY Summer Serving Tray

Hello everyone! How's everyone doing? I hope all is well. Today I am bringing you a quick and easy design. We're going to create a summer serving tray. You could also use this tray as a decor element as well. I am reusing a wooden crate I purchased a few years back for $3 at my local Target store. I figured it would be perfect to repaint and add a few other embellishments. If you're ready, let's create a cute summer tray. Video tutorial Materials One wooden crate I am reusing an old wooden crate I purchased at Target for $3.  Acrylic paint Optional mod podge-If you decide to seal your paint One paintbrush Scissors Fruit stickers or other summer embellishments  I found a pack of clear fruit stickers at Dollar Tree One wooden summer word sign E6000 or hot glue Begin by applying your acrylic paint to your wooden tray. I am using multisurface acrylic paint for the main tray. Be sure to allow your tray to fully dry. Between each coat of paint, I used my blow dryer to help wi...

Decoupaged Glass Jar Candle Holders with Faux Leaves and Gold Wire

  Learn how to create beautiful decoupaged glass jar candle holders using leaves and gold wire. This DIY project is a perfect way to upcycle old glass jars and create unique candle holders for your home decor.  I hope you're all doing well. The weather has cooled down, and we're enjoying the change. I'd like to share a quick upcycling decoupage project with you all today.  I had some extra glass yogurt jars and bought two taper candle holders from Target's dollar section. I wasn't sure what to do with them at first. In today's project, I will show you how to decorate small glass jars using faux fall leaves and gold wire. Video tutorial Materials Needed: - Two taper candle holders - A paintbrush - Mod Podge - Faux fall leaves or a decorative napkin - Hot glue - Two battery-operated tealight candles - Gold wire Applying Mod Podge and faux leaves to glass jars To start with, grab a paintbrush and use it to apply Mod Podge on your glass jar. Apply a small amount of ...

Simple DIY Glass Candle Holder Design

 Hi everyone!  Today we will create a simple do-it-yourself craft. This craft was under five dollars and takes very few materials. I only had to pick up two of the main materials, the glass jar, and the wall creation leaf design. If you're ready I will provide you with a material list, and step, by step instructions.  Video tutorial Materials  One glass jar-Purchased at Dollar Tree One wall creation decal sticker design-Purchased at Dollar Tree Frosted glass spray Gold wire One Wire cutter Optional- craft gems with sticky backing First, take your two glass jars, and give them a quick wash. This will help to remove any residue that may be left from the purchase sticker after removing it. Be sure to take a cloth, and completely dry your glass jars.  Once you have allowed your jars to completely dry, lay out a section of cardboard, and take your frosted glass paint, and apply it onto your glass jars. When you spray your jars, be sure to move to a well-ventilated ar...

Search This Blog

All content Copyright

Copyright 2021-2026 I ask that you do not take or use my photos or words without permission. If you have any questions, please feel free and contact me. Also, for more information on this blog, check out the disclosure policy tab above. Thank you