Skip to main content

Fall faux window design using picture frames from Dollar Tree

 Hello everyone! I'm so excited for Fall next month. I'm honestly over the heat. We have had a few rainy days in between. I was recently inspired to create my latest craft on a rainy day. It rained most of the day, and I had time to go through and clear out a few things in my craft room. I came across four wood picture frames I had recently purchased at my local Dollar Tree. I decided to create a faux fall window design. I hope you enjoy this craft just as much as I did!


Video tutorial


Materials

Four picture frames--I'm using picture frames I purchased from Dollar Tree. Size-3½ inches by 5 inches.

Hot glue- You will also need a heavy-duty adhesive like E6000 or gorilla glue. 

Fall leaf stickers--I purchased my pack at Dollar Tree

Paint- I'm using a color called Milk jug for my frames, red for my wood letter sign, and brown to add a few streaks on the frame

One wood fall letter sign--Purchased a pack at Dollar Tree

Paintbrush

Twine

Scissors

Optional--Fall craft leaves

Screwdriver--You will only need this if you purchased this particular picture frame with the metal design on the bottom

Start by removing any decorations on your four frames. I used my screwdriver to remove the screws, and metal design. Skip this step if your frames are plain and without the decorations.


Next, remove the backing from all four frames. Once you have removed the backing and glass. Set your glass aside.

Once the backing and glass have been removed, take your paint brush and begin to apply your paint. I applied around two coats of paint and used my blow dryer to dry my paint in between coats. 

After you have applied paint to the front of each frame, take each frame and begin to paint all areas that will be visible once the frames are glued together. 


Take your brown paint and use a paintbrush to gently add on a few streaks. I wanted to give my frames a little bit of a distressed look. I used my paintbrush and randomly added a few streaks of my brown paint. I used my finger to gently spread the paint. 

Next, begin to add your frames together. I used hot glue to connect my frames, but shortly after I noticed that it would take more than just hot glue to attach my frames. I grabbed my E6000 glue and added that along with my hot glue. This will help to keep your frames together and prevent them from coming apart. I recommend using a second adhesive along with your hot glue.



After, take your wooden sign and begin to add paint to it. I decided to go with a red paint color. 


Next, take your wood sign and glue it onto the middle of your four frames.

After, turn your glued frames over and begin to add only your glass back into each frame. I found that it helps to add hot glue into the four corners of each frame before adding in your glass. Doing this helps to keep your glass in place and prevent it from shifting. 



Take your fall stickers, and begin to add them to your glass. I decided to add my stickers to the front of my glass. You can always add your stickers behind your glass. Keep in mind that by adding your stickers behind the glass you would need to add adhesive to keep them on your glass. This is why I decided to stick with adding my stickers to the front of my glass. 

You are now ready to add your twine onto the back of your frame design. Flip your frame over, and cut a medium-length section. Next, bend back the flexible points on your frames. I added hot glue, and then tied a knot around each point. The flexible points are the tabs that hold in the glass.

I went ahead and also added the remaining twine down onto my frame using my hot glue. You can also add an extra adhesive when attaching your twine. 


This last step is completely optional, but I decided to take a few fall craft leaves and add them to my frame. I thought it was a simple addition and it turned out so cute! 


Your Fall faux window design is now complete! I love how this turned out, and it was pretty simple to create using a few materials from Dollar Tree. I hope that you will create one this Fall season. I love hearing from all of you. Be sure to let me know what you think in the comments below. I'll see you soon.

Pin/Save/Share



Comments

  1. I love window-look wall hangings, yours looks nice. Thanks so much for linking up at the Unlimited Link Party 80. Pinned.

    ReplyDelete
  2. Che bella finestra autunnale
    Buon fine settimana

    ReplyDelete
    Replies
    1. Grazie. Sei così gentile. Ti auguro un buon fine settimana.

      Delete
  3. CONGRATS Stephanie! Your post is FEATURED at the Unlimited Link Party 81!

    ReplyDelete
  4. So pretty! I now regret not buying a wood window mirror at a church flea market that I recently went to!! Love this!! Thanks so much for sharing!!
    Hugs,
    Deb

    ReplyDelete
    Replies
    1. Debbie, thank you. You can still give this a try. I used picture frames. There are so many different ideas. I'm so happy that you enjoyed this craft.

      Delete
  5. I am in love with those frames Stephanie, even the before pics were so cute. The after is perfect! I think we are all ready for fall by the looks of it. Thank you for sharing!

    ReplyDelete
    Replies
    1. Cara, thank you! Yes, I loved those frames so much. This was a fun little fall project to work on. :)

      Delete
  6. Cute! Pinned to share and for future reference :)

    ReplyDelete
  7. I'm featuring you this week when the next To Grandma's house we go link party starts - thanks for sharing with us!

    ReplyDelete
  8. I've watched the video the frames are super super cute! Amazing and easy to make, I'm really impressed. Btw, your videos are awesome, I love the music and how well you explain things, it's a real pleasure to watch them.

    ReplyDelete
    Replies
    1. Mariama, you are the best and always so kind. I do appreciate your feedback. Thank you very much. I'm glad you enjoyed the tutorial. ♡

      Delete
  9. What a sweet idea! I love how this picture frame window would suit any given season by simply changing out the features!

    ReplyDelete
    Replies
    1. Thank you so much! It was such a fun project. :)

      Delete

Post a Comment

I love hearing from you! Your comments and creative ideas truly brighten my day. I do my best to respond to everyone, so if you have a question or just want to say hello, please leave a note below. To keep our community a positive and inspiring space, spam or off-topic comments will be removed. Happy crafting!

Popular posts from this blog

DIY Budget-Friendly Succulent Plant Hanger Design

 Hi everyone! I hope that you are doing well. Today I am sharing an easy DIY craft that is budget-friendly, and easy to create. A material list will be provided, along with step-by-step instructions on creating your very own. Be sure to check out the video tutorial below. Video tutorial Materials One 4x4 framed art Acrylic paint Faux succulents Hot glue and any other heavy-duty adhesive Twine Scissors  Floral cutters Paintbrush You can find most of these materials at your local Dollar Tree This project costs under five dollars If your frame comes with beads as shown in the picture above, take your scissors and remove the beads. You will actually reuse the beads later on in this craft. Take the inner section of your out and set it aside. Next, take your acrylic paint and paintbrush, and begin to apply your paint to your frame. I applied three coats of my paint to my frame. Next, use your paintbrush you apply paint over the inner section of the frame we removed earlier. I applie...

DIY Magnetic Faux Succulent & Floral Lids — Upcycled Fridge Accent

I created these magnetic faux succulent and floral lids using some metal jar tops that I had saved. With a little creativity, they transformed into charming, lightweight accents that add a pop of color and personality to the fridge. Each lid features its own tiny arrangement—part succulent and part floral—all crafted with intention and charm. This project is easy and budget-friendly, allowing you to use items you already have while adding a lovely touch to your home. Quick Video Tutorial Materials Metal jar lids (one large, one small) Letter beads (to spell LOVE ) Faux moss Faux succulents Faux vines Faux flowers (pink, green foliage, white accents) Hot glue gun and glue sticks Magnets I began with the larger metal lid, attaching small letter beads to spell out LOVE . This created a meaningful little focal point and set the tone for the rest of the design. Next, I glued a layer of faux moss along the bottom of the lid. The moss added softness and helped anchor the colorful...

Personalize Your Space: DIY Floral Summer Sign on Plywood

I recently found a floral summer sign made of plywood at Michaels and decided to personalize it with some paint and lettering. I used my new Cricut Maker 3 for this DIY project and I'm excited to share the process with you. Join me as I show you how to paint and decorate this simple project. Video tutorial Materials needed:  - Floral plywood sign - Acrylic paint - Paintbrush - Lettering (created with Cricut Maker 3 and foil matte vinyl) You can use stencil or sticker lettering of your choice Start by applying paint to your plywood sign. I started with white and yellow paint for the center of my sign. Next, apply paint to each of the flowers on the sign. I used darker pink, yellow, light blue, and yellow colors. After that, I used my Cricut Maker 3 to create a "hello summer" lettering using foil matte vinyl. You can use any lettering or stencil you prefer. This was my first time using the Mother's Day gift I received. To apply my letters, I gently removed them with my ...

Upcycled Plastic Bowl Hanging Planter

  Hi everyone! I hope that you are doing well. I had a few microwavable noodle bowls that I washed out and put away. I took a few days to think about what I could create using these bowls. It finally came to me, and I decided I would take one of the plastic bowls, and upcycle it. We will take this plastic bowl, and create a hanging planter. I will take you through each step, and as always I will provide a video tutorial. If you're ready, create with me! Hanging planter video tutorial Materials One Plastic Bowl  I'm reusing a plastic noodle bowl One hole puncher Twine You will need four sections of twine, of the same length. River pebbles, or craft rocks  I purchased river pebbles at my local Dollar Tree. Medium size wood beads (optional) Paint I'm using Acrylic chalk paint. Color is called mineral.l Hot glue Faux succulents, and vines Craft foam blocks Paintbrush or sponge brush Scissors Floral snips Begin by taking your hole puncher, and punching out four holes in your ...

How I Refreshed an Old Garden Statue with Paint (Easy Patio DIY)

This charming toad perched on his toadstool has been a beloved part of our patio for years, enduring the passage of time while gradually succumbing to the effects of sun and weather. With each season, he has faded a little more, losing some of his vibrant colors and details. Rather than allowing him to blend into the background and become just another forgotten decoration, I decided it was time to breathe new life into him.  I shared the whole process in a quick YouTube Shorts video called “Watch Me Refresh This Old Garden Statue.” It’s a simple before‑and‑after, but such a satisfying one.  Materials I Used Garden statue (mine is a toad on a toadstool) Sandpaper Acrylic paints Small detail brushes Mod Podge (for sealing and protection) Sanding and Painting I began by gently sanding the statue to smooth out the chipped and faded paint. It only takes a few minutes, but it makes such a difference. Once the surface felt ready, I brought out my acrylic paints and started...

Search This Blog

All content Copyright

Copyright 2021-2026 I ask that you do not take or use my photos or words without permission. If you have any questions, please feel free and contact me. Also, for more information on this blog, check out the disclosure policy tab above. Thank you