Skip to main content

Floral Painted Jewelry Dish using Plant Saucer

Learn how to make a beautiful floral-painted jewelry dish using a plant saucer with easy step-by-step instructions in this guide.

Today, I'm excited to share a DIY tutorial with you. We'll be making a jewelry dish using plastic plant saucers. I had bought two plant saucers from Lowe's but had yet to use them. So, this would be a great way to make use of them. I made two jewelry dishes for my daughters.

Floral painted Jewelry dish with jewels inside

Video tutorial
Floral Painted Jewelry Dish using Plant Saucer

Materials to make floral painted Jewelry dish

These are the materials I am using: 
Plastic plant saucers that measure 4.17 x 4.17 x 1.01 inches
 Acrylic paint in various colors
Paintbrushes
Mod Podge

Acrylic paint, paintbrush and plastic saucer

Painting flowers onto the plant saucer
First, make sure your plant saucer is clean and dry. Then, use a small paintbrush to paint a few assorted flowers on it. Paint as many flowers as you like.

Small paintbrush and saucer with painted flowers

Painted white flowers and purple background

Adding a painted background
Once the paint has dried, paint the background of your plastic saucer with your choice of paint. I painted one dish a light blue, and the other a light purple.

After painting the background, use a heating tool on a low setting to dry the paint completely.

Assorted painted flowers and blue background

Plastic saucers with painted flowers and Mod Podge

Sealing the paint
Finally, seal the paint by applying Mod Podge to each dish.

That's it! Your jewelry dishes are now complete. They turned out so pretty, and I love how they look. You can store your jewelry in each dish, making it perfect for bracelets, gems, rings, and more.

Floral painted jewelry dish using plant saucer

Pin share save


Comments

  1. That is so pretty and what a great idea. I would have never have thought of using a plant saucer like this.

    ReplyDelete
    Replies
    1. Kim, thank you so much. Isn't it wonderful that we can use simple things to create another use for it. I appreciate you visiting and Commenting.

      Delete
  2. You are very creative. The jewelry dish is cute. #MMBC

    ReplyDelete
  3. Carol, you are so kind. I appreciate it. Thank you for taking the time to visit and comment. 😊🥰

    ReplyDelete
  4. These are amazing Stephanie! And so very pretty. You are very creative. :) #MMBC

    ReplyDelete
    Replies
    1. Jayne, you are so kind. I appreciate you visiting and sharing your thoughts. 😊🥰

      Delete
  5. Super cute, this would be a fun activity for a children's party or camp too wouldn't it?

    ReplyDelete
    Replies
    1. Thank you! That’s a great idea! That would be such a fun activity. I envision it as a create-and-paint-along event. Perfect! 🎉🎨🖌️

      Delete
  6. What a clever and creative idea! I love how it turned out, too. I always enjoy seeing what you come up with, Stephanie! :) Visiting from the Sweet Tea & Friends linkup.

    ReplyDelete
    Replies
    1. Jennifer, you are so kind. I appreciate you taking the time to visit. I'm happy to hear you enjoyed this craft.

      Delete
  7. I just love these diy jewelry dishes! And I've got to tell you I'm impressed how beautifully you paint freehand.
    Thanks' bunches for sharing this with Sweet Tea & Friend's this month.

    ReplyDelete
    Replies
    1. Paula, you're so kind. I appreciate it so much. Thanks for visiting.

      Delete
  8. These are just so pretty xx. I would love it if you could share this at my new re-booted link party, Serenity Saturday at www.serenityyou.com

    ReplyDelete
  9. This would make a nice gift. They are beautiful!

    ReplyDelete
  10. Very pretty Steph, you are so creative. I am happy to share your lovely project at Love Your Creativity. Happy spring.

    ReplyDelete

Post a Comment

I love hearing from you! Your comments and creative ideas truly brighten my day. I do my best to respond to everyone, so if you have a question or just want to say hello, please leave a note below. To keep our community a positive and inspiring space, spam or off-topic comments will be removed. Happy crafting!

Popular posts from this blog

DIY Budget-Friendly Succulent Plant Hanger Design

 Hi everyone! I hope that you are doing well. Today I am sharing an easy DIY craft that is budget-friendly, and easy to create. A material list will be provided, along with step-by-step instructions on creating your very own. Be sure to check out the video tutorial below. Video tutorial Materials One 4x4 framed art Acrylic paint Faux succulents Hot glue and any other heavy-duty adhesive Twine Scissors  Floral cutters Paintbrush You can find most of these materials at your local Dollar Tree This project costs under five dollars If your frame comes with beads as shown in the picture above, take your scissors and remove the beads. You will actually reuse the beads later on in this craft. Take the inner section of your out and set it aside. Next, take your acrylic paint and paintbrush, and begin to apply your paint to your frame. I applied three coats of my paint to my frame. Next, use your paintbrush you apply paint over the inner section of the frame we removed earlier. I applie...

Fourth of July Wooden Hanging Sign

 Hi everyone. I hope that you are all doing well. This week we encountered floods and tornado warnings in our area. We are all fine, but it worried a lot of us. The sun decided to finally make an appearance. Perfect timing to create another quick and easy Fourth of July craft.   I am sharing a quick Fourth of July wooden sign craft. I still have a few festive decorations lying around my craft room.  I am also reusing my wooden sign from an older project. So if you have an older wooden sign that you would love to give a quick transformation to, this craft is perfect for you! Video tutorial Materials One wooden sign- I am reusing my wooden sign from an older project  The sign size is 11 x 8 Foam scatter stars- I purchased a bag at my local Dollar Tree store Tulle or ribbon Paintbrushes Acrylic paint- Red, white and blue Adhesive- I am using both E6000 and hot glue Scissors Applying paint to a wooden sign Begin by adding your acrylic paints to your wooden board. ...

Create Your Own Patriotic Stained Glass Decor from Upcycled Jars

If you love crafting, upcycling, and adding a patriotic touch to your home, this stained glass decor project is perfect for you! By reusing three glass jars and transforming them with vibrant stained glass paints, twine, and embellishments, you can create a beautiful, unique centerpiece for your summer celebrations.  Video tutorial Materials You'll Need: - Three upcycled glass jars - Blue and white stained glass paint  - Red acrylic paint (mixed with white stained glass paint to create red) - Star cupcake toppers (leftover from previous projects) - Paintbrush - Gem strips - Twine - Scissors - Hot glue gun - White flower embellishments - Heating tool (optional for faster drying) 1. Painting the Jars Start by applying blue stained glass paint to the first jar. Remember that stained glass paint needs multiple coats for optimal opacity. The Gallery brand takes a few hours to fully cure; however, if you're short on time, you can use a heating tool to speed up the drying process. ...

DIY Magnetic Faux Succulent & Floral Lids — Upcycled Fridge Accent

I created these magnetic faux succulent and floral lids using some metal jar tops that I had saved. With a little creativity, they transformed into charming, lightweight accents that add a pop of color and personality to the fridge. Each lid features its own tiny arrangement—part succulent and part floral—all crafted with intention and charm. This project is easy and budget-friendly, allowing you to use items you already have while adding a lovely touch to your home. Quick Video Tutorial Materials Metal jar lids (one large, one small) Letter beads (to spell LOVE ) Faux moss Faux succulents Faux vines Faux flowers (pink, green foliage, white accents) Hot glue gun and glue sticks Magnets I began with the larger metal lid, attaching small letter beads to spell out LOVE . This created a meaningful little focal point and set the tone for the rest of the design. Next, I glued a layer of faux moss along the bottom of the lid. The moss added softness and helped anchor the colorful...

Easy 4th Of July Metal hanging design

 Hello everyone! How have you been? I wanted to share this super easy decoration with all of you. I created this simple metal hanging decoration for the 4th of July. I absolutely love how it turned out. I found this metal holder at my local Dollar Tree. I haven't seen it in the store before. I was excited to find this and brainstorm for my next project. As always, the material list is below. I will walk you through each step of creating your very own.  Video tutorial Materials One metal hanging holder Mod Podge  Tulle or ribbon Acrylic paint Craft foam block Foam scatter stars Faux flowers One decorative napkin Scissors Floral cutters Hot glue Three craft sticks Twine Applying paint to metal design Start by taking your paintbrush and applying your acrylic paint to your metal holder. I only used my paint on the metal surface. When applying the acrylic paint I noticed it does go on smoothly. You could prep the metal surface if you are concerned about the paint not adhering ...

Search This Blog

All content Copyright

Copyright 2021-2026 I ask that you do not take or use my photos or words without permission. If you have any questions, please feel free and contact me. Also, for more information on this blog, check out the disclosure policy tab above. Thank you