Skip to main content

Fall Fox Garland: Easy and Affordable DIY Decor with Dollar Tree Items

Create a beautiful fall-themed fox garland using affordable Dollar Tree items. This easy and inexpensive DIY decor project will add a touch of seasonal charm to your home. Follow our step-by-step guide to make your own fall fox garland today.

Hello everyone! I'm excited to share an effortless garland design with you all. Our project today involves creating a garland using fox ornaments purchased from Dollar Tree. We will also incorporate wooden mini-leaf embellishments and faux floral to add a wonderful touch. You can find a complete list of materials below.

Completed fox garland displayed on twine with wooden leaves and faux floral

Video tutorial




Creating your fall fox garland

Materials 

Mod Podge
Paintbrush
Acrylic paint
Mini wood leaf embellishments
Fox ornaments 
Decorative napkin
I'm also using a mini-craft iron 
Parchment paper
Hot glue
Craft knife
Sandpaper

Adding the decorative napkin to the wooden foxes using Mod Podge

Mod podge, paintbrush, wooden fox, decorative napkin, and mini iron.


To prepare the wooden fox for decorating, start by removing the bottom layer of the napkin. If you have a mini craft iron, it can be used to apply the decorative napkin to the fox. After brushing a thin layer of Mod Podge onto the fox, place the napkin design side down on top. Cover the napkin with parchment paper and use the craft iron to press down while moving over the fox. Once the parchment paper is removed, the napkin should be smooth. Use a craft knife to remove any excess napkin and sandpaper to smooth out the surface around the fox. Finally, apply a thin layer of Mod Podge to the top of the decorative paper and allow it to dry. To finish decorating all of the wooden foxes, just follow the same steps as before. Be sure to repeat the process for each individual fox.

Applying acrylic paint to wooden leaf embellishments


To begin, grab a paintbrush and coat your wooden leaf embellishments with acrylic paint. I opted for an orange hue and a deeper shade of red for my leaves. Additionally, I applied brown acrylic paint to the stems of the leaves.

Adding wooden foxes and leaf embellishments to twine

Wooden foxes with decoupage decorative napkin design, twine, floral cutters, wooden leaves, and faux floral on a table

Once your twine is prepared, you can begin adding your foxes and leaf embellishments onto it. Apply a small amount of hot glue at the back of each decoration once it is attached to the twine. This will prevent the decorations from rotating and guarantee that the front side is always facing outward.

Once you have added your twine with foxes and leaf decorations, you can complete the look by adding faux floral.  To do so, first remove the stems from each flower using floral cutters, leaving only the flower bud. Next, add each flower to the twine using a small amount of hot glue. 





Your fall fox garland is complete and looks beautiful displayed on a mantle, window, or door.

Did you enjoy this craft? Please share your thoughts in the comments below.

Pin Share Save

Pinterest pin image Fall fox garland with wooden leaf embellishments and faux floral



Comments

  1. Looks cute. At first I thought the leaves were lights. You know I like things that light up :) Thanks so much for linking up at the #UnlimitedLinkParty 130. Pinned.

    ReplyDelete
    Replies
    1. Dee, yes, I can't forget how you love things that light up. ✨️ If you put a tree up for Christmas, I'm sure it has many lights and is beautiful.

      Delete
    2. The tree yes but there's also candles and light up displays of all sorts :)

      Delete
    3. Oh yes, I figured you had all the light-up displays as well. 😊 I love it.

      Delete
  2. I have never tried an iron with mod podge before, I think I need to give it a try, I always dislike the wrinkles I seem to get when I use it. Your foxes look adorable, what a great way to bring in the fall Stephanie!

    ReplyDelete
    Replies
    1. Cara, this was my first time trying out the iron method and I really enjoyed it. It took less time compared to the other method I use. I was surprised at how well it works with eliminating the wrinkles. I hope that you have a wonderful weekend.

      Delete
  3. That is SO CUTE and looks pretty easy. I may have to try this with my boys!

    ReplyDelete
    Replies
    1. Leah, thank you! Yes, it is a pretty easy craft. I think you will love creating this with your boys. :)

      Delete
  4. Steph, this is precious! Pinned 📌.
    #20

    ReplyDelete
  5. That is a great idea for using wooden ornaments. Foxes are one of my favorite fall animals. Love the woodland theme! You're being featured on the #HomeMattersParty. Drop by my blog after 9 pm on Thursday to see your feature! https://lovemylittlecottage.com/

    ReplyDelete
    Replies
    1. Kristie, thank you so much. I'll be sure to drop by. :)

      Delete
  6. Very cute garland! We loved it so much at #HomeMattersParty that you're also being featured on my blog as well. Thanks for sharing!

    ReplyDelete
    Replies
    1. Allyson, thank you! I'm so happy you all enjoyed it. I'll be sure to stop by. :)

      Delete
  7. Visiting again to say thanks so much for linking up at #IMadeItMondayLinkParty 26. Pinned again.

    ReplyDelete
  8. i was just clicking around on the internet -- lol -- and came across the creatively crafty link party --- decided to join in the fun and been checking everyone's links --- this to too cute! i love the little foxes!!

    ReplyDelete
    Replies
    1. Diane, aw I'm glad you were able to come across her link party and visit my page. Thank you! Im happy to hear you enjoyed the foxes. 😊

      Delete
  9. Oh my word, what a cute garland. You always seem to find the perfect paper napkins for all your craft projects. This will be a feature over at Handmade Monday this week.

    ReplyDelete
  10. Your Fox Garland looks beautiful <3 Thank you for sharing the tutorial - using iron is new for me and I am going to try it :)

    ReplyDelete
    Replies
    1. Thank you so much. 😊 Yes, please give it a try. Using the mini iron helps make the process much easier when applying Mod Podge. Also, it gets rid of the wrinkles in the napkin. Thank you so much for visiting.

      Delete
    2. saved on 'to do list' and pined :) thank you for inspiration :*

      Delete
    3. Yay! You will just love how it turns out. Thank you. 🥰

      Delete
  11. Wonderful, thanks for sharing on craft schooling sunday!

    ReplyDelete
  12. Oh wow, these are super cute. I am going to show it to my granddaughter as I am sure she will love to make it.
    I visited you via The Happy Now Blog Link- Up #399
    I linked up this week with = 108+109. Hope you will join us M-S SeniorSalonPitStop and W-S #WordlessWednesday. You will find both under BLOGGING.

    ReplyDelete
    Replies
    1. Aw, thank you. I hope your granddaughter has fun creating her very own. :)

      Delete

Post a Comment

Thank you so much for taking the time to leave a comment. Your comments brighten my day. I hope that you know that it is appreciated. I do my best to respond to every comment. If you have a question, please feel free and ask away!

Popular posts from this blog

Easy 4th Of July Metal hanging design

 Hello everyone! How have you been? I hope all is well. My girls are enjoying the start of summer break, and this mama is busy. I wanted to share this super easy decoration with all of you. I created this simple metal hanging decoration for the 4th of July. I absolutely love how it turned out. I found this metal holder at my local Dollar Tree. I haven't seen it in the store before. I was excited to find this and brainstorm for my next project. As always, the material list is below. I will walk you through each step of creating your very own.  Video tutorial Materials One metal hanging holder Mod Podge  Tulle or ribbon Acrylic paint Craft foam block Foam scatter stars Faux flowers One decorative napkin Scissors Floral cutters Hot glue Three craft sticks Twine Applying paint to metal design Start by taking your paintbrush and applying your acrylic paint to your metal holder. I only used my paint on the metal surface. When applying the acrylic paint I noticed it does go on smoothly. Y

How to Make a Charming Tea Bag Holder Using a Garden Pot and Wood Circle

  Are you a tea lover looking for a creative DIY project? Learn to create a unique tea bag holder using a garden pot, wood circle, wooden bead, and paper floral decorations. Get inspired and add a personal touch to your tea time. Today, we will make a tea bag holder using a garden ceramic pot and a wooden circle. This holder is both functional and cute. Below, I will provide a list of materials and step-by-step instructions. Video tutorial How to Make a Charming Tea Bag Holder Using a Garden Pot and Wood Circle Materials  Garden pot- I'm using a white 4inch planter pot (The one I am using is a ceramic pot)  One wood circle- I picked up a pack of 6  3'' wood circles at my local Walmart store for $1.80 Mod Podge Decorative napkin Paintbrush One medium or large wooden bead Paper flowers and leaves Adhesive Scissors White acrylic paint Letter stamps Stamp ink Preparing your decorative napkin and Mod Podge Let's begin by taking a decorative napkin and removing the second lay

Floral Painted Jewelry Dish using Plant Saucer

Learn how to make a beautiful floral-painted jewelry dish using a plant saucer with easy step-by-step instructions in this guide. Today, I'm excited to share a DIY tutorial with you. We'll be making a jewelry dish using plastic plant saucers. I had bought two plant saucers from Lowe's but had yet to use them. So, this would be a great way to make use of them. I made two jewelry dishes for my daughters. Video tutorial Floral Painted Jewelry Dish using Plant Saucer These are the materials I am using:  Plastic plant saucers that measure 4.17 x 4.17 x 1.01 inches  Acrylic paint in various colors Paintbrushes Mod Podge Painting flowers onto the plant saucer First, make sure your plant saucer is clean and dry. Then, use a small paintbrush to paint a few assorted flowers on it. Paint as many flowers as you like. Adding a painted background Once the paint has dried, paint the background of your plastic saucer with your choice of paint. I painted one dish a light blue, and the other

How to Create an Artificial Succulent Birdhouse Decoration

  Hello everyone! I have a quick and easy DIY craft project to share with you. I wasn't sure what to do with the second birdhouse I purchased at my local Dollar Tree a while back. If you follow me, you probably know how much I love succulents, especially faux ones. So, why not design a birdhouse with a faux succulent roof? I would love it if you could create one with me. The process is simple, and I'll take you through a full materials list. Video tutorial How to Create an Artificial Succulent Birdhouse Decoration To make the birdhouse design, you will need the following materials: - One craft birdhouse (you can buy it at Dollar Tree) - Assorted faux succulents - Craft moss - Artistic paint (Espresso in this case) - Paintbrush - Hot glue Applying paint to the birdhouse Start by applying acrylic paint to your birdhouse. Use Espresso color, and add a small amount of water to thin out the paint. This will result in a stained finish without having to use stain. After applying the p

Fun Decorative Summer Sign

  Hi everyone! I'm so excited to bring you all this fun summer craft. Today we're creating this fun summer hanging sign. I was excited to find some items at a discount. If you're ready, I'll take you through each step to create your summer decorative sign. Video tutorial Materials I found the floral at Michael's craft store for a discounted price of $0.79.  I bought a summer-designed napkin at Dollar Tree for $1.25 per pack.  The "Hello" wood décor was purchased at Michael's for $1.19, as well as the wood summer décor, which was also discounted.  I only used the summer flip-flops for my craft, at $1.19 each. I'm using white and bright magenta paint.  The wood square plaque measuring 10'' x 10'' was bought at Michael's for $5.99.  I also got Mod Podge, a sponge brush or paintbrush, floral snips, scissors, and wire cutters, which are needed to remove the metal section from the summer wood décor pieces. Begin by applying your white

DIY Cute Tabletop Organizer Using Metal Cans

Hello there! If you're new here, welcome to my blog! In this post, I will be sharing an easy DIY tutorial on how to create a functional and adorable tabletop organizer using metal cans. With a few basic materials such as a round particle board, spray paint, and some other supplies, you can transform ordinary cans into a stylish and useful organizer to keep your desk or workspace tidy. I hope you enjoy this tutorial and find it helpful! Video tutorial  DIY Cute Tabletop Organizer Using Metal Cans     Materials needed: - One round wooden board - Four tin cans - Chalk spray paint - Acrylic paint - Mod Podge - Decorative napkin - Four wooden square pieces - Scissors - Wood glue - Paintbrush Optional: - Twine - Fabric hearts I found a color called Ella Rose at my local Lowe's store. This time, I decided to work with chalk spray paint instead of using regular paint and a paintbrush. I took four cans to my garage and sprayed around three coats of chalk paint on them. If you decide to

DIY Dollar Tree Nail Polish Organizer

  Hello there! I'm delighted to have you on the blog today. Are you seeking a creative DIY idea to organize your nail polish collection? If yes, then you have come to the right place.  Today, I will share a simple and functional method to organize your nail polish collection using only three main materials. You will need stock paper, gem strips, and a three-compartment plastic organizer, all of which can be purchased from your local Dollar Tree or craft store. Video tutorial  DIY Dollar Tree Nail Polish Organizer These are the things you'll need:  A plastic three-compartment organizer  Gem strips  Shimmery cardstock (found a pack at Dollar Tree)  Hot glue  Scissors and a pencil Tracing the organizer onto cardstock  To create your nail polish organizer, first, place the plastic organizer on top of the cardstock, and trace the shape of the organizer on the cardstock using a pencil. Don't worry if it could be better, just focus on tracing the shape as accurately as possible. C

Easy Dollar Tree Easter Tabletop Decoration

Transform your Easter table into a whimsical wonderland with a delightful metal bunny plaque from Dollar Tree - it's an easy and affordable DIY project! Today we are creating an Easter tabletop decoration using one of the galvanized bunnies from Dollar Tree. I actually purchased it last year, but I hadn't gotten around to creating a craft with it until now. This craft is beginner-friendly and only uses a few materials.  Video tutorial Materials One galvanized bunny sign One rectangular wooden piece  can easily use scrap wood. I am using a wooden piece from a block set. I purchased one round wood piece at Dollar Tree; they come in different shapes. I decided to go with the oval shape. Acrylic paint- I am using a color called celery for the wood pieces and applying white to the bunny sign. Twine Faux greenery and tulips Mod Podge Paintbrush Hot glue Decorative napkin Floral cutters Begin by taking your paintbrush and applying paint over your galvanized bunny. This is not require