Skip to main content

Halloween Glass Candy Jar

 Hi everyone! Today we're going to design a glass jar. I purchased one glass jar from Target. I love that this jar came with a wooden lid. I figured I would create a Halloween candy jar. This is a super easy project and takes around 20 minutes. 


VIDEO TUTORIAL


Materials

One glass jar--$5 at Target

Paint-I'm using black paint

One decorative Halloween napkin

Mod Podge

Paintbrush

Scissors

Optional--wood letter tiles and assorted mini pumpkins

Begin by applying black paint to your lid. Allow your paint to completely dry.


Next, take your decorative napkin, and cut two sections.



After, use your paint brush and apply your mod podge. I applied mod podge on two sections of my lid. I applied it on the top and bottom. I left the center of my lid empty. Take your napkins and apply them over the mod podge sections. Smooth out your napkins and apply mod podge on top of each napkin. I used my blow dryer to dry and smooth out my napkin.


Once you have applied your napkins onto your lid, take your hot glue and begin to add on your letter tiles. This is step is optional. 
For my assorted pumpkins, I found a pack of mini pumpkins on sticks at my local Dollar Tree store. I took each pumpkin and snapped off the stick. You can also use scissors, or floral cutters when removing the stick.  I took a little hot glue and applied a few pumpkins onto my lid.



Your Halloween glass candy jar is complete! I love how simple this was to create. I hope you have fun with this project. Be sure to let me know if you decide to create one too. Thank you so much for stopping by, and creating with me. I'll see you soon.


Pin/Share/Save



Comments

  1. This is so cute! I'll be featuring them Sunday on Happiness is Homemade over at Life as a LEO Wife. Thanks for sharing!

    ReplyDelete
    Replies
    1. Thank you so much. I'm so happy to hear you enjoyed it. 😊🎃

      Delete
  2. That is cute and the perfect candy holder. Tried to pin 4 times, sorry, won't pin.

    ReplyDelete
    Replies
    1. Dee, thank you! And thank you for trying to pin. :) Not sure why it was giving you issues.

      Delete
  3. I just got my Fall decorations up and this is so cute! I wish I had the crafty genes in order to attempt to make one for myself!

    ReplyDelete
    Replies
    1. Jennifer, oh, how nice to have your fall decorations up! I still need to work on a few areas of my home to finish off the decorating. I think you could easily make this. It's beginner-friendly as well. Perfect for anyone!

      Delete
  4. So cute and perfect for the season. Featuring when my party opens. Thank you!

    ReplyDelete

Post a Comment

I love hearing from you! Your comments and creative ideas truly brighten my day. I do my best to respond to everyone, so if you have a question or just want to say hello, please leave a note below. To keep our community a positive and inspiring space, spam or off-topic comments will be removed. Happy crafting!

Popular posts from this blog

Easy 4th Of July Metal hanging design

 Hello everyone! How have you been? I wanted to share this super easy decoration with all of you. I created this simple metal hanging decoration for the 4th of July. I absolutely love how it turned out. I found this metal holder at my local Dollar Tree. I haven't seen it in the store before. I was excited to find this and brainstorm for my next project. As always, the material list is below. I will walk you through each step of creating your very own.  Video tutorial Materials One metal hanging holder Mod Podge  Tulle or ribbon Acrylic paint Craft foam block Foam scatter stars Faux flowers One decorative napkin Scissors Floral cutters Hot glue Three craft sticks Twine Applying paint to metal design Start by taking your paintbrush and applying your acrylic paint to your metal holder. I only used my paint on the metal surface. When applying the acrylic paint I noticed it does go on smoothly. You could prep the metal surface if you are concerned about the paint not adhering ...

DIY Budget-Friendly Succulent Plant Hanger Design

 Hi everyone! I hope that you are doing well. Today I am sharing an easy DIY craft that is budget-friendly, and easy to create. A material list will be provided, along with step-by-step instructions on creating your very own. Be sure to check out the video tutorial below. Video tutorial Materials One 4x4 framed art Acrylic paint Faux succulents Hot glue and any other heavy-duty adhesive Twine Scissors  Floral cutters Paintbrush You can find most of these materials at your local Dollar Tree This project costs under five dollars If your frame comes with beads as shown in the picture above, take your scissors and remove the beads. You will actually reuse the beads later on in this craft. Take the inner section of your out and set it aside. Next, take your acrylic paint and paintbrush, and begin to apply your paint to your frame. I applied three coats of my paint to my frame. Next, use your paintbrush you apply paint over the inner section of the frame we removed earlier. I applie...

Fourth of July Wooden Hanging Sign

 Hi everyone. I hope that you are all doing well. This week we encountered floods and tornado warnings in our area. We are all fine, but it worried a lot of us. The sun decided to finally make an appearance. Perfect timing to create another quick and easy Fourth of July craft.   I am sharing a quick Fourth of July wooden sign craft. I still have a few festive decorations lying around my craft room.  I am also reusing my wooden sign from an older project. So if you have an older wooden sign that you would love to give a quick transformation to, this craft is perfect for you! Video tutorial Materials One wooden sign- I am reusing my wooden sign from an older project  The sign size is 11 x 8 Foam scatter stars- I purchased a bag at my local Dollar Tree store Tulle or ribbon Paintbrushes Acrylic paint- Red, white and blue Adhesive- I am using both E6000 and hot glue Scissors Applying paint to a wooden sign Begin by adding your acrylic paints to your wooden board. ...

Easy DIY Summer Serving Tray

Hello everyone! How's everyone doing? I hope all is well. Today I am bringing you a quick and easy design. We're going to create a summer serving tray. You could also use this tray as a decor element as well. I am reusing a wooden crate I purchased a few years back for $3 at my local Target store. I figured it would be perfect to repaint and add a few other embellishments. If you're ready, let's create a cute summer tray. Video tutorial Materials One wooden crate I am reusing an old wooden crate I purchased at Target for $3.  Acrylic paint Optional mod podge-If you decide to seal your paint One paintbrush Scissors Fruit stickers or other summer embellishments  I found a pack of clear fruit stickers at Dollar Tree One wooden summer word sign E6000 or hot glue Begin by applying your acrylic paint to your wooden tray. I am using multisurface acrylic paint for the main tray. Be sure to allow your tray to fully dry. Between each coat of paint, I used my blow dryer to help wi...

Create Your Own Patriotic Stained Glass Decor from Upcycled Jars

If you love crafting, upcycling, and adding a patriotic touch to your home, this stained glass decor project is perfect for you! By reusing three glass jars and transforming them with vibrant stained glass paints, twine, and embellishments, you can create a beautiful, unique centerpiece for your summer celebrations.  Video tutorial Materials You'll Need: - Three upcycled glass jars - Blue and white stained glass paint  - Red acrylic paint (mixed with white stained glass paint to create red) - Star cupcake toppers (leftover from previous projects) - Paintbrush - Gem strips - Twine - Scissors - Hot glue gun - White flower embellishments - Heating tool (optional for faster drying) 1. Painting the Jars Start by applying blue stained glass paint to the first jar. Remember that stained glass paint needs multiple coats for optimal opacity. The Gallery brand takes a few hours to fully cure; however, if you're short on time, you can use a heating tool to speed up the drying process. ...

Search This Blog

All content Copyright

Copyright 2021-2026 I ask that you do not take or use my photos or words without permission. If you have any questions, please feel free and contact me. Also, for more information on this blog, check out the disclosure policy tab above. Thank you