Skip to main content

Metal Tray Succulent Design

 


Hello everyone! I recently created a metal tray succulent display, and I love how it turned out. This DIY project takes just a few materials, and most of them I purchased at my local Dollar Tree. 

Video tutorial



Materials needed















One metal bottle cap--Purchased at Dollar Tree, and yes, it is labeled metal bottle cap in the craft

 section of the store

One glass candle holder--Purchased at Dollar Tree

Chalk paint--I'm using black for the metal cap, and mineral for the glass candle holder.

Faux Succulents- My main big succulent was purchased at Dollar Tree. Smaller ones were purchased a while back at Michael's.

Floral snips

Hot glue

E6000

Spanish moss-Purchased at Dollar Tree

Home sweet home mini sign--Purchased at Michaels



Start by taking the rope off of your metal cap. The rope was originally there for hanging your metal cap. For this project, we don't need it. Just poke them through the holes on each side. 




Next, apply your black paint onto your metal cap. Between coats, I used a blow dryer to help with the drying process. You will need around four coats of chalk paint to completely cover your metal cap.





Now you are ready to apply paint to your glass candle holder. Take your candle holder, and apply your paint onto the glass surface. I'm using a paint called mineral. I applied around four coats of paint and repeated the drying process with this as I did for the metal cap.




Next, take your adhesive, and hot glue. Apply a thin layer of your adhesive onto your glass candle holder.  You can apply both hot glue, and adhesive for extra hold. 




Once everything is completely dry, take your succulents, and floral snips. If needed cut any long stems. I pre-cut my succulents to size.

Taking your succulents, apply a small amount of hot glue on the bottom side of each succulent flower. 

Add each succulent to the front side of your metal cap. 





All that is left is to take your Spanish moss and add it behind your succulents, and a little behind your mini sign. I added a thin layer of hot glue before placing my moss down.



Once you have added your succulents, take your mini sign and add it on the inside back section of your metal cap using a little hot glue. --You can do this step before adding your moss, or after.





You're all done! All that is left is to display your beautiful creation. 

Thank you so much for stopping by! Be sure to check out my YouTube channel for more tutorials, and fun projects---Steph Creates-DIY Home & Crafts

You may also like

DIY Dollar Tree Wood Pallet Succulent Key Holder Design


Pin/Save/Share



Comments

  1. I love succulents, your tray looks pretty! Thanks so much for linking up at the Unlimited Link Party 73. Pinned.

    ReplyDelete
    Replies
    1. Dee,
      thank you so much! And it's always a pleasure linking up at your link parties. Thank you. =)

      Delete
  2. Your succulent tray looks fab, it'll be a feature at Handmade Monday this coming week :-)

    ReplyDelete
  3. Visiting again to say thanks so much for linking up at A Themed Linkup 141 for Trays. Shared.

    ReplyDelete
    Replies
    1. Dee, thank you for always hosting many different link parties. They are always so much fun to share at. 💗

      Delete
  4. Stephanie, CONGRATS! Your post is FEATURED at #AThemedLinkup 142 for Handcrafted Jewelry from the previous linkup for Trays.

    ReplyDelete
  5. What an affordable, cute project. I love succulents. Thank you for sharing your inspiration.

    ReplyDelete
    Replies
    1. Thank you! Succulents have always been a favorite of mine. Thank you for stopping by and sharing your thoughts with me. :)

      Delete
  6. This is so cute and gorgeous, love succulents and this is a great way to have them on display.
    Thanks so much for participating and sharing at SSPS 292. See you again next week!

    ReplyDelete
    Replies
    1. Thank you so much. I'm happy to hear you enjoyed my succulent tray design. :)

      Delete
  7. Thanks for sharing with us I'm featuring you this week when the next To Grandma's house we go link party starts!

    ReplyDelete
    Replies
    1. Thank you so much. Excited to have my post featured at your party. :)

      Delete
  8. Love this! I appreciate you taking the time to show us the steps to make this lovely succulent piece.
    Thanks so much for sharing this tutorial with Sweet Tea & Friends this month.

    ReplyDelete
  9. great job it looks awesome thank you for sharing with us. Come see what we shared at http;//shopannies.blogspot.com

    ReplyDelete
  10. I love using this and that for a project...and candlesticks with trays or saucers is brilliant. Perfect for any season, thanks for sharing, Sandi

    ReplyDelete
    Replies
    1. Sandi, thank you so much. I appreciate you visiting.

      Delete

Post a Comment

I love hearing from you! Your comments and creative ideas truly brighten my day. I do my best to respond to everyone, so if you have a question or just want to say hello, please leave a note below. To keep our community a positive and inspiring space, spam or off-topic comments will be removed. Happy crafting!

Popular posts from this blog

Easy Breezy DIY: How To Make Summer Coasters

Happy Summer! I'm excited to share this simple DIY craft with you. I found some cute summery napkins at my local Dollar Tree and knew I wanted to create another summer craft, but I wasn't sure what I wanted to create. Today I will show you how to create these simple summer coasters that are perfect for the season. Video tutorial Easy Breezy DIY: How To Make Summer Coasters Materials: - Round wood circles - Napkins - Mod Podge (I'm using the dishwasher-safe one) - Acrylic paint - Paintbrush - One cork sheet (I'm using the adhesive cork sheet from Dollar Tree) Begin by taking your adhesive cork sheet and flipping it over so that the adhesive backing is facing up. Next, take a pencil and start to trace each of your round wooden circles. Then, take your scissors and cut out each of the traced circles. You can use a craft knife to make any necessary adjustments.  After that, take your circles and begin to remove the back of each of the cork circles exposing the sticky backin...

DIY Budget-Friendly Succulent Plant Hanger Design

 Hi everyone! I hope that you are doing well. Today I am sharing an easy DIY craft that is budget-friendly, and easy to create. A material list will be provided, along with step-by-step instructions on creating your very own. Be sure to check out the video tutorial below. Video tutorial Materials One 4x4 framed art Acrylic paint Faux succulents Hot glue and any other heavy-duty adhesive Twine Scissors  Floral cutters Paintbrush You can find most of these materials at your local Dollar Tree This project costs under five dollars If your frame comes with beads as shown in the picture above, take your scissors and remove the beads. You will actually reuse the beads later on in this craft. Take the inner section of your out and set it aside. Next, take your acrylic paint and paintbrush, and begin to apply your paint to your frame. I applied three coats of my paint to my frame. Next, use your paintbrush you apply paint over the inner section of the frame we removed earlier. I applie...

Eco-Friendly Crafting: How to Make a Beautiful Flower Holder from Cardboard

Discover how to create a beautiful flower holder from cardboard in an eco-friendly way. Hello everyone, today I'm excited to share an eco-friendly crafting project with you.  While cleaning up my wrapping paper collection, I noticed the paper roll had run out, leaving only the cardboard paper center. Instead of throwing it away, it would be a great opportunity to reuse the paper and create something beautiful.  Video tutorial Materials - Cardboard paper (preferably thicker wrapping paper) - Faux flowers (such as tulips and greenery) - Two fabric hearts and butterfly stickers - Two craft clothespins - Hot glue or glue stick - Twine -Hole puncher - Optional faux flexible flowers to wrap around the twine. Step one: Preparing the paper To get started, cut a piece of cardboard paper. Make sure to choose a size that will fit the flowers you plan to use later on in the craft. The size of the section should be large enough to accommodate the flowers in the center of the sleeve. For my...

Simple DIY Autumn Floral And Bead Wreath

  Create a beautiful autumn wreath with this simple DIY tutorial. Learn how to incorporate floral elements and beads to make a stunning seasonal decoration for your home. Hello! I am delighted to have you here with me today. For this DIY project, I have a simple idea that I think you'll love. We will be creating an Autumn floral and bead wreath using just a few materials. If you're viewing this project, I'm sure you love Fall as much as I do. It is my favorite season, and I have been busy creating new crafts to share with all of you. Video tutorial How to create an Autumn floral and bead wreath Materials One wreath  $4.99  (I'm using a grapevine wreath, and I purchased it at Michael's. It is a 14'' wreath) Faux fall floral  (My flowers were purchased at Michael's, and it was actually a stem bundle)  $9.99 , but they are having a sale. I paid $4.99 Beads  $1.60  (Purchased at Michael's) Stretch cord  $2.88  (Purchased at Walmart) You will also...

🎄🌟Easy Christmas Gift Wrapping Ideas

Get creative this holiday season with these easy Christmas gift-wrapping ideas. From simple and elegant to fun and festive, find inspiration for wrapping your gifts in style. I’m going to share some quick gift-wrapping decorating ideas with all of you. I grabbed a few empty boxes and my red and brown gift paper. Although I’m not a professional when it comes to wrapping paper, I thought I would share some decoration ideas with all of you. I had all of my materials on hand, but a lot of these are fairly cheap when purchased at a craft store. Let’s decorate! Check out the video tutorial   Materials Wrapping paper Mini garland Acrylic paint Paintbrush Decorative gems Twine or craft rope Decorative tape Tape Hot glue Scissors Wooden Christmas mini decorations (such as a mini wood wreath and an ornament) Gift wrap decoration number one For the first design, I am using brown wrapping paper, tape, red paint, green paint, white paint, two wooden Christmas decorations, hot glue, and twine to...

Search This Blog

All content Copyright

Copyright 2021-2025 I ask that you do not take or use my photos or words without permission. If you have any questions, please feel free and contact me. Also, for more information on this blog, check out the disclosure policy tab above. Thank you