Skip to main content

Metal Tray Succulent Design

 


Hello everyone! I recently created a metal tray succulent display, and I love how it turned out. This DIY project takes just a few materials, and most of them I purchased at my local Dollar Tree. 

Video tutorial



Materials needed















One metal bottle cap--Purchased at Dollar Tree, and yes, it is labeled metal bottle cap in the craft

 section of the store

One glass candle holder--Purchased at Dollar Tree

Chalk paint--I'm using black for the metal cap, and mineral for the glass candle holder.

Faux Succulents- My main big succulent was purchased at Dollar Tree. Smaller ones were purchased a while back at Michael's.

Floral snips

Hot glue

E6000

Spanish moss-Purchased at Dollar Tree

Home sweet home mini sign--Purchased at Michaels



Start by taking the rope off of your metal cap. The rope was originally there for hanging your metal cap. For this project, we don't need it. Just poke them through the holes on each side. 




Next, apply your black paint onto your metal cap. Between coats, I used a blow dryer to help with the drying process. You will need around four coats of chalk paint to completely cover your metal cap.





Now you are ready to apply paint to your glass candle holder. Take your candle holder, and apply your paint onto the glass surface. I'm using a paint called mineral. I applied around four coats of paint and repeated the drying process with this as I did for the metal cap.




Next, take your adhesive, and hot glue. Apply a thin layer of your adhesive onto your glass candle holder.  You can apply both hot glue, and adhesive for extra hold. 




Once everything is completely dry, take your succulents, and floral snips. If needed cut any long stems. I pre-cut my succulents to size.

Taking your succulents, apply a small amount of hot glue on the bottom side of each succulent flower. 

Add each succulent to the front side of your metal cap. 





All that is left is to take your Spanish moss and add it behind your succulents, and a little behind your mini sign. I added a thin layer of hot glue before placing my moss down.



Once you have added your succulents, take your mini sign and add it on the inside back section of your metal cap using a little hot glue. --You can do this step before adding your moss, or after.





You're all done! All that is left is to display your beautiful creation. 

Thank you so much for stopping by! Be sure to check out my YouTube channel for more tutorials, and fun projects---Steph Creates-DIY Home & Crafts

You may also like

DIY Dollar Tree Wood Pallet Succulent Key Holder Design


Pin/Save/Share



Labels:

Comments

  1. Dee | GrammysGrid.comMarch 22, 2022 at 2:26 AM

    I love succulents, your tray looks pretty! Thanks so much for linking up at the Unlimited Link Party 73. Pinned.

    ReplyDelete
    Replies
    1. StephanieMarch 22, 2022 at 10:25 AM

      Dee,
      thank you so much! And it's always a pleasure linking up at your link parties. Thank you. =)

      Delete
  2. Sum of their StoriesMarch 27, 2022 at 3:37 AM

    Your succulent tray looks fab, it'll be a feature at Handmade Monday this coming week :-)

    ReplyDelete
  3. Dee | GrammysGrid.comFebruary 20, 2023 at 10:23 PM

    Visiting again to say thanks so much for linking up at A Themed Linkup 141 for Trays. Shared.

    ReplyDelete
    Replies
    1. StephanieFebruary 21, 2023 at 7:15 AM

      Dee, thank you for always hosting many different link parties. They are always so much fun to share at. 💗

      Delete
  4. Dee | GrammysGrid.comFebruary 27, 2023 at 5:29 AM

    Stephanie, CONGRATS! Your post is FEATURED at #AThemedLinkup 142 for Handcrafted Jewelry from the previous linkup for Trays.

    ReplyDelete
  5. Vintage Style GalMarch 20, 2023 at 12:51 PM

    What an affordable, cute project. I love succulents. Thank you for sharing your inspiration.

    ReplyDelete
    Replies
    1. StephanieMarch 21, 2023 at 12:48 PM

      Thank you! Succulents have always been a favorite of mine. Thank you for stopping by and sharing your thoughts with me. :)

      Delete
  6. SlabsJanuary 13, 2024 at 4:35 PM

    This is so cute and gorgeous, love succulents and this is a great way to have them on display.
    Thanks so much for participating and sharing at SSPS 292. See you again next week!

    ReplyDelete
    Replies
    1. StephanieJanuary 13, 2024 at 4:59 PM

      Thank you so much. I'm happy to hear you enjoyed my succulent tray design. :)

      Delete
  7. TarahlynnJanuary 16, 2024 at 9:00 AM

    Thanks for sharing with us I'm featuring you this week when the next To Grandma's house we go link party starts!

    ReplyDelete
    Replies
    1. StephanieJanuary 16, 2024 at 10:40 AM

      Thank you so much. Excited to have my post featured at your party. :)

      Delete
  8. PaulaShort January 18, 2024 at 6:47 AM

    Love this! I appreciate you taking the time to show us the steps to make this lovely succulent piece.
    Thanks so much for sharing this tutorial with Sweet Tea & Friends this month.

    ReplyDelete
  9. annies homeMarch 1, 2024 at 1:17 PM

    great job it looks awesome thank you for sharing with us. Come see what we shared at http;//shopannies.blogspot.com

    ReplyDelete
  10. Sandi MagleAugust 8, 2025 at 8:34 AM

    I love using this and that for a project...and candlesticks with trays or saucers is brilliant. Perfect for any season, thanks for sharing, Sandi

    ReplyDelete
    Replies
    1. StephanieAugust 9, 2025 at 11:11 PM

      Sandi, thank you so much. I appreciate you visiting.

      Delete

Post a Comment

I love hearing from you! Your comments and creative ideas truly brighten my day. I do my best to respond to everyone, so if you have a question or just want to say hello, please leave a note below. To keep our community a positive and inspiring space, spam or off-topic comments will be removed. Happy crafting!

Popular posts from this blog

Easy Breezy DIY: How To Make Summer Coasters

Happy Summer! I'm excited to share this simple DIY craft with you. I found some cute summery napkins at my local Dollar Tree and knew I wanted to create another summer craft, but I wasn't sure what I wanted to create. Today I will show you how to create these simple summer coasters that are perfect for the season. Video tutorial Easy Breezy DIY: How To Make Summer Coasters Materials: - Round wood circles - Napkins - Mod Podge (I'm using the dishwasher-safe one) - Acrylic paint - Paintbrush - One cork sheet (I'm using the adhesive cork sheet from Dollar Tree) Begin by taking your adhesive cork sheet and flipping it over so that the adhesive backing is facing up. Next, take a pencil and start to trace each of your round wooden circles. Then, take your scissors and cut out each of the traced circles. You can use a craft knife to make any necessary adjustments.  After that, take your circles and begin to remove the back of each of the cork circles exposing the sticky backin...
32 comments
Read more

DIY Budget-Friendly Succulent Plant Hanger Design

 Hi everyone! I hope that you are doing well. Today I am sharing an easy DIY craft that is budget-friendly, and easy to create. A material list will be provided, along with step-by-step instructions on creating your very own. Be sure to check out the video tutorial below. Video tutorial Materials One 4x4 framed art Acrylic paint Faux succulents Hot glue and any other heavy-duty adhesive Twine Scissors  Floral cutters Paintbrush You can find most of these materials at your local Dollar Tree This project costs under five dollars If your frame comes with beads as shown in the picture above, take your scissors and remove the beads. You will actually reuse the beads later on in this craft. Take the inner section of your out and set it aside. Next, take your acrylic paint and paintbrush, and begin to apply your paint to your frame. I applied three coats of my paint to my frame. Next, use your paintbrush you apply paint over the inner section of the frame we removed earlier. I applie...
24 comments
Read more

Design your very own organizer using Dollar Tree Items

  Learn how to design and create your own personalized organizer using affordable Dollar Tree items. Get creative with materials and follow these easy DIY steps to make a unique and functional organizer for your home or office space. Hi everyone! I hope that you are doing well. Recently I took a trip to my local Dollar Tree and found these stackable plastic organizers.  Today we're going to design our very own organizer. To create your organizer you will only need a few materials. Most of my materials were purchased at my local Dollar Tree store. You will need three of the plastic organizing drawers.  Be sure to check out my YouTube channel for more DIY tutorials-- For more DIY Tutorials Click here! And I would love it if you subscribed to the channel DIY Organizer video tutorial below Materials THREE STACKABLE ORGANIZING DRAWERS 5X5X1.75 IN ASSORTED FAUX PEARL BEADS SMALL WOOD BEADS PEEL AND STICK FLORAL DECALS PEEL AND STICK DECORATIVE PAPER HOT GLUE PAINT- I'M USING AC...
32 comments
Read more

How I Refreshed an Old Garden Statue with Paint (Easy Patio DIY)

This charming toad perched on his toadstool has been a beloved part of our patio for years, enduring the passage of time while gradually succumbing to the effects of sun and weather. With each season, he has faded a little more, losing some of his vibrant colors and details. Rather than allowing him to blend into the background and become just another forgotten decoration, I decided it was time to breathe new life into him.  I shared the whole process in a quick YouTube Shorts video called “Watch Me Refresh This Old Garden Statue.” It’s a simple before‑and‑after, but such a satisfying one.  Materials I Used Garden statue (mine is a toad on a toadstool) Sandpaper Acrylic paints Small detail brushes Mod Podge (for sealing and protection) Sanding and Painting I began by gently sanding the statue to smooth out the chipped and faded paint. It only takes a few minutes, but it makes such a difference. Once the surface felt ready, I brought out my acrylic paints and started...
6 comments
Read more

DIY Mini Wood Lantern

  Hello everyone. I'm so excited to share this mini wood lantern craft with you all. I recently bought a box of wood tumbling blocks from Dollar Tree, and I wasn't sure what I was going to create with them. I decided since I also had some wood craft popsicle sticks on hand that I would use those with the blocks, and create a mini wood lantern. This project took around 30 minutes, but I promise you, you will just love how it all comes together with just a few materials. If you're ready, I'd love it if you created it with me!  Video tutorial Materials One pack of wood tumbling blocks  I purchased mine at my local Dollar Tree Ten wood craft popsicle sticks Paint  I'm using black paint, I also had some antique white paint on hand, but I went with black paint Hot glue Twine Faux floral, and greenery One medium-sized bead One battery-operated candle Floral snips Scissors Building the top and bottom sections of the lantern Start by taking five of your tumbling blocks. Usin...
26 comments
Read more

Search This Blog

All content Copyright

Copyright 2021-2025 I ask that you do not take or use my photos or words without permission. If you have any questions, please feel free and contact me. Also, for more information on this blog, check out the disclosure policy tab above. Thank you