Skip to main content

Wood Pallet Succulent Key Holder Design

Create a unique and stylish key holder design using a mini wood pallet from Dollar Tree and affordable materials, like faux succulents.  Learn how to make this DIY project and add a touch of greenery to your home decor.

I recently took a trip to my local Dollar Tree store, and I am excited to share this simple wood pallet succulent key holder design with all of you. For this project, you will only need a few materials.  If you're ready, gather your materials, and create with me!

Be sure to check out the video tutorial

Materials

One Dollar Tree Pallet

Succulent plants 

You can purchase the Dollar Tree succulent plants if you choose. I purchased my succulent, and vine plant from Hobby Lobby, and it was discounted

Black paint

Two screw hooks 

I used two smaller gold screw hooks

Diamond wrap gems

The ones I am using have a sticky backing on them

E6000 Glue or any adhesive

Twine

Scissors

Paintbrush

Hot glue

Wire cutters/ scissors

Start off by taking your black paint, and applying it to the front, sides, back, and inner sections of your pallet. When you are done, your pallet should be completely covered in black paint. 

Set your pallet aside, and allow it to fully dry. Next, take your gold screw hooks, and insert them into your pallet on the lower section. Just twist them, until they have gone completely through the wood. 



Now you are ready to start adding on your diamond wrap gems. Take your scissors, and cut strands long enough to go from one end to the other. I decided to take off the sticky backing on each strand. 

I ended up applying a thin layer of adhesive and applying them onto my pallet. 

Once you have added your gems, take your scissors, and cut your vine, and succulents. 
After you have cut each vine and succulent, use some hot glue, and apply them onto your wood-painted pallet. You can place them, however, you would like. I started out gluing my vine, and then I took a few of my cut succulent flowers and added them around my vines.

Next, take your twine, and cut just enough to create a loop for hanging your pallet. Flip your pallet over, take some hot glue, and glue the ends of your twine down, creating a loop. 

You're all done! Now you can take your pallet key holder, and hang it up. 


I hope you have enjoyed this simple DIY project. Be sure to check out my other hanging design crafts below! I'll see you all soon with another fun DIY project! And be sure to check me out on YouTube! 

Steph Creates-DIY Home & Crafts

Other DIY Hanging projects

DIY -Decorative Hanging Flower Design With Wooden Pots.

DIY Hanging Flower Decoration

Comments

  1. Wow! I can't believe how gorgeous this turned out. Pinning! :) Visiting from Grammy's Grid Unlimited Link Party.

    ReplyDelete
    Replies
    1. Jennifer, aw thank you so much. I'm happy to hear you enjoyed it. :)

      Delete
    2. Visiting again, this time from Senior Salon Pit Stop. I just love the colors on this. I think the black and gold combination is striking, and the pop of color with the flowers is just right. Beautifully done, Stephanie! :)

      Delete
    3. Jennifer, thank you. You are very kind. I appreciate it. ♡

      Delete
  2. How pretty! Thanks so much for linking up at the #UnlimitedLinkParty 118. Pinned.

    ReplyDelete
    Replies
    1. Dee, thank you! I always appreciate you stopping by.

      Delete
  3. Love the brass and gold detail together Stephanie! I keep seeing these pallets, but never find them in our Dollar Tree. I will have to look harder for them.

    ReplyDelete
  4. Thank you! 😊 I love those mini pallets from Dollar Tree. There is always something fun to create when using them. I hope that you ate able to find some.

    ReplyDelete
  5. Visiting again to say thanks so much for linking up at the #UnlimitedLinkParty 135. Tried to pin again but keeps saying: Sorry! Something went wrong. Please make sure the URL is correct and try again.

    ReplyDelete
    Replies
    1. Dee, thank you! I'll be sure to check out the URL. thank you for letting me know.

      Delete

Post a Comment

Thank you so much for taking the time to leave a comment! Your feedback truly brightens my day, and I appreciate it. I always strive to respond to every comment. If you have a question, please don’t hesitate to ask! Please note that spam or comments that do not provide value will be automatically removed. Thank you!

Popular posts from this blog

Spring Hanging Design Using Bamboo Serving Boards

 Today I am sharing an easy project. We are creating two Spring hanging designs using bamboo serving boards. I purchased these boards at my local Big Lots store. It was two for five dollars. I actually was not sure what I was going to do with them, but the other day I figured it out. I will provide a step-by-step tutorial, a material list, and a video tutorial will also be included. Happy crafting! Video tutorial Main materials Hot glue or any adhesive of your choice Floral cutters Twine Faux floral Pencil Scissors Paintbrush Acrylic paint First design One wooden serving board One decorative napkin Mod Podge Second design Ribbon One craft chalkboard watering can Floral sticker Painting the serving board Begin by applying your acrylic paint to your wooden serving board.  Adding the decorative napkin Next, take your decorative napkin and unfold it. Place your napkin on top of your painted board and begin to trace out the center of your board. If your napkin has a second layer be...

Celebrate in Style: DIY Patriotic Napkin Rings

Hey everyone! I hope you're doing well. Today, I want to share an easy DIY project. We're going to make patriotic napkin rings using just a few materials. I usually find extra craft supplies in my craft bins because I often shop craft sales at the stores. I got the wooden stars and rings from my local Hobby Lobby store. The great thing about this project is that it's easy and quick. I'll provide you with a materials list and a step-by-step tutorial. Video tutorial Celebrate in Style: DIY Patriotic Napkin Rings Materials Acrylic paint  Gem strips (I'm using the gem strips from Dollar Tree)  E6000 or hot glue  Paintbrush  Wooden stars  Wood rings size 1.89in (4.8cm) Start by painting each of your wooden rings and stars. I chose to paint my rings white. Apply the paint to each ring's outer, back, and inner surface. For the stars, I went with red, white and blue. Next, we will attach the gem strips to each ring. Before adding the gem strips, attach each star to a wo...

Crafting Chic Fabric Bowls: Stylish Storage Made Simple!

If you're anything like me, you love reusing fabric, whether it's fabric squares or scraps. You probably have a collection of fabric just waiting to be transformed into something beautiful. Today, we're going to turn those scraps into charming fabric bowls. These bowls are   perfect for holding jewelry, craft supplies, or simply adding a splash of color to your space. This project is straightforward to complete and offers significant rewards, making it an excellent way to repurpose leftover materials. Video tutorial Materials Needed: 1 large glass jar 1 small glass jar Plastic wrap or plastic cling (I used cling wrap because it stays in place). Mod Podge 1 paintbrush Fabric scraps Scissors Embellishments (like mini florals, buttons, or lace—get creative!) 1. Adding Plastic Wrap Turn your jar upside down so the bottom is facing up. Cover it with plastic wrap—cling wrap hugs the jar nicely and keeps things from slipping while you work. 2. Prepping Your Fabric Cut y...

All content Copyright

Copyright 2021-2025 I ask that you do not take or use my photos or words without permission. If you have any questions, please feel free and contact me. Also, for more information on this blog, check out the disclosure policy tab above. Thank you